Product description

This is a cylindrical Scotch-type solid-fuel industrial steam boiler with fire and smoke tubes and three passes, in the range of 300 kg/h to 10,000 kg/h. Working pressure is set to the customer’s need between 0.5 bar and 20 bar; diameter is 1,300 mm to 3,000 mm and test pressure is 3 bar to 30 bar. Smoke tubes are St 35.8 to DIN 2448, and insulation is 80 kg/m², 10 cm rock wool covered with galvanized sheet. The package includes the boiler, level and pressure controls, condensate tank, burner or stoker, spring and deadweight safety valves, blowdown valve, water softener and control panel; every steam boiler manufactured is warranted for 2 years.

More from this company

Related products

Steam Boiler — Isın Makina Ticaret Limited Şirketi

Isın Makina Ticaret Limited Şirketi

Steam Boiler

Steam Boiler

ISIN Makina manufactures steam boilers from 20 kW to 1500 kW. The boilers run on solid, liquid or gas fuel, with a three-pass or intermediate-baffle shell, and with manual feed, stoker, pellet, gas or liquid-fuel burners. On-site custom fabrication and sizing, automation and programming, and on-site installation, maintenance, repair and dismantling are offered. The boilers carry a 2-year warranty and CE quality documents with efficiency test reports.

Edirne

Steam Generator — Isın Makina Ticaret Limited Şirketi

Isın Makina Ticaret Limited Şirketi

Steam Generator

Steam Boiler

Steam generators are built from 20 kW to 1500 kW for solid, liquid or gas fuel. The body uses two rows of horizontal coils and accepts stoker, pellet, gas or liquid-fuel burners. On-site custom fabrication and sizing, automation and programming, and on-site installation, maintenance, repair and dismantling are included. The generators carry a 2-year warranty and are CE marked.

Edirne

Scotch Type Steam Boiler — General Kazan

General Kazan

Scotch Type Steam Boiler

Steam Boiler

The Scotch steam boiler is a three-pass unit. Flame and flue gas from combustion travel across sufficient heating surfaces so that maximum heat transfer is achieved before the gas leaves to the stack without low-temperature corrosion, giving high boiler efficiency. It responds to sudden steam draws. It has a wide evaporation surface, steam volume and a large corrugated furnace. After manufacture it is hydraulically tested at the pressure calculated by the standard. Smoke tubes are reached from the front doors, the furnace from the large rear explosion door, and the water side from the manhole and at least two hand holes. The design is high-pressure, fire-tube and cylindrical, to TS EN 12953, TRD, DIN and EN. Shell, tube plates and furnace are P265GH or P355GH boiler plate to EN 10028; smoke tubes are boiler tube to EN 10216 or EN 10217.

Aksaray

Steam Boiler — İtimat Kazan ve Makine San. Tic. Ltd. Şti.

İtimat Kazan ve Makine San. Tic. Ltd. Şti.

Steam Boiler

Steam Boiler

Heaton liquid- and gas-fired steam boilers are built as three-pass, fire-tube, fully cylindrical units. Capacity runs from 400 kg/h to 25 t/h, on diesel, heavy fuel oil, natural gas, LPG, LNG or biogas. A large furnace is specified for complete combustion, a water-cooled reversal chamber for operating safety, and a large steam space for dry steam. Boiler plate is stated to be 20% thicker than that of other makers. With an integrated economizer, combustion efficiency is given as 95%. The company says the boilers are designed and built with TSE and CE documentation, and the control panel can run them fully automatically for 24 or 72 hours without attendance.

İstanbul · Ikitelli Organized Industrial Zone

Ready to Find Your Next Manufacturing Partner?

Explore Turkish manufacturers and industrial suppliers on TurkIndustry. Discover potential sourcing partners, submit RFQs and compare quotations — all from one platform.

Start Sourcing Today →