Industrial category
Warehouse Systems
Specialist companies in Warehouse Systems.
Top industrial zones
Products in This Category
Approved supplier product catalogs in this category.
Depota Raf Sistemleri İnş. İth. İhr. San. ve Tic. Ltd. Şti.
Heavy Duty Racking Systems
Warehouse Systems ProductHeavy-duty racking is the pallet rack preferred for heavy stocks, especially palletised loads; it is also called pallet stacking racking. The modular build lets the racks be dismantled and reinstalled in another area. Uprights formed for higher strength have holes for height adjustment, so beam levels can follow the type and weight of the stored goods. Locking pins between beam and upright, floor anchors and static bracing tie the system together. Beams are produced from NPI profile and the system is worked with a forklift. Every part is electrostatic powder coated. Depotaraf manufactures this system in its own plant in Kahramankazan.
Ankara
Depota Raf Sistemleri İnş. İth. İhr. San. ve Tic. Ltd. Şti.
Cantilever Racking Systems
Warehouse Systems ProductCantilever racking is made of vertical columns and horizontal arms fixed to them, so long goods such as pipe, profile, timber and sheet can be stored horizontally. Arms can be single- or double-sided, the upright row can be extended to the required length, and the arm layout can later be changed without special tools. Arm length follows the width of the material and arm spacing follows whether the load sags: spacing can be wider for rigid pipe and profile, and tighter for timber and sheet. The system is used for metal profiles, pipe, timber and plastic goods. A capacity label on the product page shows a maximum of 2000 kg on an arm. The system is manufactured at the Kahramankazan plant.
Ankara
Depota Raf Sistemleri İnş. İth. İhr. San. ve Tic. Ltd. Şti.
Light Duty Racking Systems
Warehouse Systems ProductLight-duty racking is for boxed goods that are handled by hand and do not need a high load capacity. It is built from shelves and box-section beams and can be installed in narrow areas. Uprights are made from sheet or profile according to the requirement. With accessories such as perforated panels, dividers, small-parts bins and hanging bars it is also used as display shelving in retail stores as well as in warehouses. The modular structure can be dismantled and moved. Uprights, beams and shelves are produced in a wide range of sizes. All parts are electrostatic powder coated. Depotaraf manufactures the product in its own factory.
Ankara
Eksen Raf
Heavy-Duty Racking Systems
Warehouse Systems ProductHeavy-duty racking is manufactured for orderly and safe storage of palletized goods in warehouses that work with forklifts and pallet trucks. The pallet rack uses floor area vertically, increases warehouse capacity, and gives separate access to each pallet. Solutions are produced for high-ceiling warehouses, cold stores and narrow-aisle layouts. Standard pallet capacities are 500, 800, 1,000 and 1,500 kg; length is 180 cm or 270 cm, depth is 105 cm, and height is up to 12 metres according to the project. The standard beam pitch is 110 cm and can be set to the required height on the demountable frame. Systems are finished with electrostatic powder coating; a seismic calculation and an earthquake report are supplied on request.
İstanbul
Eksen Raf
Steel Racking Systems
Warehouse Systems ProductThe steel rack carries up to 80 kg per level and is used where loading is done by hand. It is applied in offices, archives, garages, workshops, small warehouses and retail stock areas where light loads need orderly storage. Standard length is 75 cm or 93 cm; depth is 31 cm, 43 cm or 59 cm; height is 200 cm, 250 cm or 300 cm. Shelf pitch is adjustable, the system is demountable, and the installation location can be changed. In custom production the level capacity can be increased to order. Racks are manufactured to Turkish Standards, finished with electrostatic powder coating, and produced under the ISO 9001:2015 quality management system.
İstanbul
Eksen Raf
Clad Rack Buildings
Warehouse Systems ProductClad rack buildings are industrial steel structures erected on open land that serve both as the storage rack and as the load-bearing frame of the building. They provide high-volume warehouse space faster than conventional building construction. Each project is engineered to the site, the soil survey and the construction requirements. Static calculations, earthquake-code requirements and wind loads are included from the start. Dimensions and load capacity follow the project; the structure is steel and the finish is electrostatic powder coating. Roof and facade panel cladding can be included on request. A soil survey is carried out before installation, and the technical documents are prepared when a building permit is required.
İstanbul
Reta Mühendislik Depo Raf Sistemleri San. ve Tic. A.Ş.
Back-to-Back Racking System
Warehouse Systems ProductBack-to-back racking is the most widely used storage system for heavy goods stacked on pallets, crates or baskets, with a broad range of use. The system applies the FIFO (first in, first out) principle and suits storage of a large variety and quantity of products. Each pallet is stored in an independent bay. The modular structure of uprights, beams, connectors and protective accessories is engineered to pallet size, weight and forklift type. Rack height, bay clearance and number of levels change with the product.
Manisa · Muradiye Organized Industrial Zone
Reta Mühendislik Depo Raf Sistemleri San. ve Tic. A.Ş.
Drive-In Racking System
Warehouse Systems ProductDrive-in racking is a high-density storage solution for large quantities of products that are the same in type and characteristics. The forklift enters the lane inside the rack block to place and retrieve pallets, so fewer aisles are needed and more pallets fit in the same area. The system is engineered as a channel structure suited to LIFO, with pallet support rails and guide rails. It is used in food, beverage, chemical, logistics, production and cold-storage warehouses.
Manisa · Muradiye Organized Industrial Zone
Reta Mühendislik Depo Raf Sistemleri San. ve Tic. A.Ş.
Cantilever Racking System
Warehouse Systems ProductCantilever racking is used especially for stacking long goods. Uprights and arms selected by load allow a wide range of products to be stored. The structure consists of vertical columns and cantilever arms fixed to them. Long materials such as pipe, profile, panel, timber, chipboard and wooden sheet are placed directly on the arms with no obstruction in front of the rack. The system can be single-sided or double-sided; arm length, height and load capacity are planned to product length and weight.
Manisa · Muradiye Organized Industrial Zone
Heber Mühendislik
Heavy-Duty Racking System
Warehouse Systems ProductThe heavy-duty racking system is engineered with thick-walled steel profiles and reinforced connectors for facilities that need storage beyond standard pallet-rack capacity. It is sized for dense loads such as coils, reels, dies and large industrial goods, and is widely used in metal, automotive, white-goods and construction-materials sectors. Bay capacity reaches up to 10,000 kg; each project is customized by engineering calculation based on product weight, forklift/crane traffic and building statics.
İzmir · Ataturk Organized Industrial Zone
Heber Mühendislik
Back-to-Back Warehouse Racking
Warehouse Systems ProductBack-to-back warehouse racking joins two rows into a single block, cutting aisle count and raising storage capacity. Direct forklift access to every pallet location supports FIFO/LIFO stock control and suits medium to heavy pallet loads. Built from hot-rolled steel profiles, the system can be installed up to 12 m high, carry up to 3,000 kg per bay and complies with TS EN 15512. Typical uses include logistics warehouses, multi-SKU pallet areas and e-commerce fulfillment centers.
İzmir · Ataturk Organized Industrial Zone
Heber Mühendislik
Mezzanine Racking Systems
Warehouse Systems ProductA mezzanine racking system horizontally divides existing warehouse height to create an extra floor, raising storage or operations capacity without enlarging the footprint. It is designed as a complete system with walkways, stairs, guardrails and goods-lift integration, and is engineering-approved via static calculations for building loads and intended use. Floor load capacity is 500–1,000 kg/m² with sheet-panel, OSB or grated decking options; the structure is made of hot-rolled steel.
İzmir · Ataturk Organized Industrial Zone
Services in This Category
Approved supplier service catalogs in this category.
Depota Raf Sistemleri İnş. İth. İhr. San. ve Tic. Ltd. Şti.
Racking Installation
Warehouse Systems ServiceRacking installation covers erecting the manufactured system on site, anchoring it to the floor and handing it over ready for use. Installation follows the layout approved at the design stage. The sequence is site preparation, a parts count after delivery, setting out, upright and beam assembly, floor fixing, and vertical and horizontal checks. Bracing and bolt tightness are reviewed before handover. In a warehouse that stays in operation, installation proceeds zone by zone. For projects in Ankara the crew is in the same city; elsewhere in Turkey, shipment and installation are planned according to project size.
Ankara
Depota Raf Sistemleri İnş. İth. İhr. San. ve Tic. Ltd. Şti.
Racking Design
Warehouse Systems ServiceRacking design determines how the warehouse will be laid out before a purchase decision. The area is measured on site; column spacing, ceiling and beam heights, door and shutter positions and floor condition are recorded. Aisle and bay layout follows product weight and size, how often goods are picked, and whether a forklift, pallet truck or reach truck is used. The plan is drawn, a three-dimensional view can be prepared on request, and production starts after approval. Survey, measurement and the layout plan are free of charge. The service is used for warehouses, archives, production plants, store back rooms and high-ceiling buildings.
Ankara
Depota Raf Sistemleri İnş. İth. İhr. San. ve Tic. Ltd. Şti.
Racking Dismantling and Reinstallation
Warehouse Systems ServiceBolted, modular racking can be dismantled and reinstalled at another address. When a warehouse moves, the existing system is inventoried, parts are grouped and marked during dismantling, and damaged components are set aside. A survey is made for the new warehouse; if the dimensions differ, the layout is redrawn, and the same system may not be rebuilt in exactly the same arrangement in another building. Missing or damaged parts can be remade in the same profile. For businesses changing warehouse, this keeps the investment in the system.
Ankara
Eksen Raf
Racking Installation and Assembly
Warehouse Systems ServiceThe installation crew carries out assembly on site, including intercity projects. Racking systems are delivered across Turkey with installation included. Heavy-duty racks are fixed to the floor with steel anchors; under the occupational safety regulation the top of the rack is also tied to the floor through seismic bracing. The systems are demountable and can be dismantled and reinstalled in another location without compromising the structure. Typical lead time is 2–3 weeks for heavy-duty projects and about 8 weeks for clad rack buildings.
İstanbul
Eksen Raf
Static Calculation and Earthquake Report
Warehouse Systems ServiceMezzanine projects include a load calculation per square metre and a static calculation. For clad rack systems, static calculations, earthquake-code requirements and wind loads are built into the design from the outset. A soil survey is required before installation, and the foundation design follows the soil report. For heavy-duty racking, a seismic calculation and an earthquake report are supplied on request. On clad-rack projects that need a building permit, the required technical documents are prepared.
İstanbul
Eksen Raf
Project-Specific Racking Manufacture
Warehouse Systems ServiceBesides standard sizes, length, depth, height and load capacity are manufactured to the project. On cantilever racks the standard arm length is 60 cm and custom production goes up to 100 cm; the system is built single-sided or double-sided and the level capacity is calculated for the load to be stored. Mezzanine decking can be MDF or steel sheet; the stair, guardrail and platform are included in the project. The site states a minimum mezzanine area of 400 m². All systems are finished with electrostatic powder coating and produced under ISO 9001:2015.
İstanbul
Reta Mühendislik Depo Raf Sistemleri San. ve Tic. A.Ş.
Racking System Engineering
Warehouse Systems ServiceThe engineering team designs storage solutions for each site in line with European Racking Federation (FEM) guidelines and EN standards. Planning is based on EN 15512 structural design of adjustable pallet racking, EN 15620 tolerances and clearances, EN 1993-1-3 cold-formed steel, EN 16681 seismic design, EN 15629 specifications and EN 15635 application and maintenance. Systems compliant with EN 15512 and tested at university are engineered to site dimensions and the product to be stored.
Manisa · Muradiye Organized Industrial Zone
Reta Mühendislik Depo Raf Sistemleri San. ve Tic. A.Ş.
Racking System Manufacturing
Warehouse Systems ServiceRacking systems are formed on roll-form lines in the 20,000 m² enclosed plant in Manisa. Robotic welding, a fully automatic power & free paint shop and integrated quality control are part of manufacture aimed at strength and long service life. ISO 9001 covers design, sales, production, installation and after-sales service. About 45% of production is exported to 41 countries.
Manisa · Muradiye Organized Industrial Zone
Reta Mühendislik Depo Raf Sistemleri San. ve Tic. A.Ş.
Racking System Installation
Warehouse Systems ServiceSince its founding the company has carried out design, manufacturing and installation together with its engineering staff. The ISO 9001 certificate also covers installation and after-sales service. Before installation, site conditions, aisle layout, load capacity and operating flow are assessed. On back-to-back, drive-in and cantilever projects, installation is completed under the same responsibility as engineering and manufacture.
Manisa · Muradiye Organized Industrial Zone
Heber Mühendislik
Seismic Analysis Racking Service
Warehouse Systems ServiceThe seismic analysis racking service starts by modelling your racking's dynamic behaviour against the site earthquake hazard map and soil class. Calculations based on EN 16681 size uprights, beams, anchors and bracing for seismic loads. Existing systems receive a strengthening report; new installs get seismically approved static projects and construction drawings. Scope covers analysis, design and application.
İzmir · Ataturk Organized Industrial Zone
Çetindağ Endüstriyel
Free Rack Survey and Project Design
Warehouse Systems ServiceA professional team provides free on-site rack survey and project design tailored to the facility. The goal is efficient warehouse layout and selecting the right racking system together. Quotes for light, heavy and narrow-aisle systems are prepared from depth, height and level data with fast response.
İstanbul · Ikitelli Organized Industrial Zone
Üçge DRS
ODİS Automatic Vertical Lift Storage System
Warehouse Systems ServiceODİS automatic vertical lift storage delivers high capacity on a small footprint—for example about 840 m² of equivalent vertical storage on a 14 m² base. A typical module with 7–9 m ceiling height on roughly 15 m² can match about 300 m² of static racking. Goods sit on trays in two storage columns served by a central lift and are presented to the operator at the pick/put station on demand. Integration with MES/ERP and WMS supports weight measurement, dwell-time tracking by expiry date and physical-vs-digital stock counts. Benefits include up to 90% floor-space savings, SKU-based picking and safer access under occupational safety rules.
Bursa
Suppliers in This Category
17 suppliers
For buyers
Get quotes from Warehouse Systems suppliers
Browse company profiles below or describe your need to collect multiple quotes in Warehouse Systems quickly.
-
Company profiles and certifications
-
Multiple quotes from one RFQ
-
Filter by capability and location
Browse Related Categories
Discover suppliers in adjacent industrial sectors.
Featured Supplier Profiles
Capability, certification, and export profiles with enough suppliers in this category.
Carbon Steel — Warehouse Systems manufacturers
20 listed suppliers
CapabilityRacking Systems — Warehouse Systems manufacturers
17 listed suppliers
ProcessSerial Production — Warehouse Systems manufacturers
17 listed suppliers
IndustryConstruction — Warehouse Systems suppliers
15 listed suppliers
CapabilityWarehouse Shelving — Warehouse Systems manufacturers
14 listed suppliers
MaterialMild Steel — Warehouse Systems manufacturers
12 listed suppliers
CertificationISO 9001 certified Warehouse Systems suppliers
11 listed suppliers
IndustryFood — Warehouse Systems suppliers
11 listed suppliers
CapabilityMezzanine Systems — Warehouse Systems manufacturers
9 listed suppliers
IndustryMachinery Manufacturing — Warehouse Systems suppliers
9 listed suppliers
MaterialGalvanized Steel — Warehouse Systems manufacturers
8 listed suppliers
IndustryAutomotive — Warehouse Systems suppliers
8 listed suppliers
Featured Product Catalogs
Standard product types with enough suppliers in this category.
Featured Service Catalogs
Standard service types in this category that meet the supplier threshold.
Find the right supplier or list your company
Send RFQs as a buyer or publish your company profile in this category.