Screw Machining

Enformak Plastik Teknolojileri

Injection Screws

Enformak injection screws are produced 100% in Türkiye. In thermoplastic and thermoset moulding they take material from the feed, melt it with mechanical energy, homogenise it and inject it into the cavity at high pressure. Design is optimised to viscosity, melt temperature and process parameters; profile, channel geometry and L/D set flow and fill speed. High-grade alloys plus coating and hardening raise resistance to wear, corrosion and sticking. Hardness 850–1050 HV, depth 0.5–0.7 mm. Standard, Barr, Maillefer, dispersive/distributive-mixer and PMMA injection screws are listed.

İstanbul · Beylikduzu Organized Industrial Zone

Enformak Plastik Teknolojileri

Plastication Barrels

Barrels are the components that heat and process feedstock in injection or extrusion; they provide controlled heating, melting, pressure and flow. Inner surfaces use bimetallic alloys or nitriding against wear, corrosion and sticking. Steel grade and heat treatment are chosen by material, process temperature and pressure. Hardness 850–1050 HV, depth 0.5–0.7 mm. Application lines listed: extrusion, injection, rubber, elastomer, silicone and PMMA barrels. Technical analysis and process-fit tests precede production.

İstanbul · Beylikduzu Organized Industrial Zone

Enformak Plastik Teknolojileri

Extrusion Screws

Enformak extrusion screws are produced 100% in Türkiye. They are the mechanical elements that take polymer from feed to melt and final form on continuous, controlled-flow lines for plastics and rubber. Geometries are designed to feedstock, additive ratio and process for mixing efficiency, thermal balance and lower energy use. Hardness 850–1050 HV, case depth 0.5–0.7 mm; surfaces are coated against wear and corrosion. Single, twin-parallel, twin-conical, rubber, Hans Weber twin-conical and Amut twin-parallel types are listed.

İstanbul · Beylikduzu Organized Industrial Zone

Enformak Plastik Teknolojileri

Bimetal, PTA, Nitriding and Chrome Coating

The screws page gives bimetal PTA, nitriding or chrome as surface-coating examples for wear, corrosion and high temperature. Barrel inner surfaces use bimetallic alloy or nitriding against wear, corrosion and sticking. The company page lists wear control among “why Enformak” items. Hardness 850–1050 HV, case depth 0.5–0.7 mm; wear and corrosion resistance are published as scale 3.

İstanbul · Beylikduzu Organized Industrial Zone

Enformak Plastik Teknolojileri

360° Technical Support and On-Site Measuring

The company page lists 360° technical support and on-site measuring among the short facts, together with specialised advice and high-standard production. Contact gives the head office and factory as Beylikdüzü OSB Mah. 9th St. No:14; sales email is [email protected]. The production-technology text states that after assembly and final inspection each product is prepared for shipment to work at maximum yield in the field.

İstanbul · Beylikduzu Organized Industrial Zone

Enformak Plastik Teknolojileri

Process-Based Screw and Barrel Design and Manufacture

The company page states each screw and barrel design is shaped by special analyses of the customer’s process, feedstock and machine. The production-technology block describes customer-led engineering design, certified materials, precision machining, in-process checks, coatings and heat treatment, then assembly, final inspection and shipment. Screw geometries optimise mixing and pressure via channel depth, pitch and tip design. Hardness 850–1050 HV, depth 0.5–0.7 mm.

İstanbul · Beylikduzu Organized Industrial Zone

Norm Salihli Vida ve Cıvata

Screw Manufacturing

Mani̇sa · Salihli Organized Industrial Zone

Klemsan Elektrik Mak. San. ve Tic. Ltd. Şti.

Custom Manufacturing

Production of custom sized electrical connection components from a technical drawing or a sample. The dimensions and details of all parts are set per order, allowing plug pins, terminals, rivets and sleeves to be manufactured in any size and thread spacing.

İstanbul · Ikitelli Organized Industrial Zone