Industrial category
Plastic Extrusion
Specialist companies in Plastic Extrusion.
Subcategories
Top industrial zones
Products in This Category
Approved supplier product catalogs in this category.
Senkron Plastik
Spaghetti Drip Irrigation Pipe
Irrigation Pipe & Hose ProductIn Senkron’s drip irrigation pipe category, spaghetti pipe is produced in 5 mm and 7 mm sizes. The micro-tube is used to carry water to the plant on online drippers and pot/greenhouse laterals. It is the current catalogue pipe item of the drip-pipe line added to the range in 2008.
Ankara · OSTIM Organized Industrial Zone
Senkron Plastik
PP Compression Couplings and Fittings
Irrigation Pipe & Hose ProductCouplings are produced from polypropylene (PP) and polyacetal (POM) to TS ISO 17885. The size range is Ø20 mm – Ø110 mm at PN 16. They tolerate pipe diameter variation of ±1 mm; the O-ring is EPDM. Blue and black series include couplings, tees, elbows, male adapters and saddles from 20 mm to 110 mm.
Ankara · OSTIM Organized Industrial Zone
Senkron Plastik
Drip Irrigation Accessories and Drippers
Irrigation Pipe & Hose ProductDrip accessories include reducing nipples in 16x20, 25x16 and 25x20 mm, adjustable drippers (red/green/wide discharge), pipe hangers, holding stakes and outlet mini valves. Parts are used with 16/20 mm drip lines and 5–7 mm spaghetti micro-tube in greenhouse and garden irrigation.
Ankara · OSTIM Organized Industrial Zone
Pipelife Türkiye
Clamped and Latch Sprinkler Pipes
Irrigation Pipe & Hose ProductARILI/PIPELIFE clamped sprinkler systems are produced in Ø75, 90, 110, 125, 140 and 160 mm. The latch system covers Ø50 mm to Ø200 mm. Pipes are made from high-density polyethylene in 5 and 6 m lengths, PN 4, 6, 8 and 10, in PE 100. They are assembled and removed in field sprinkler irrigation with leak-tight joints even at low pressure.
Ni̇ğde · Nigde Organized Industrial Zone
Pipelife Türkiye
PE Agricultural Irrigation Pipes
Irrigation Pipe & Hose ProductPolyethylene irrigation pipes are used as main, sub-main and lateral lines. They are produced from black compound with well-dispersed UV stabilizer for sunlight resistance in farm, garden and field use. Because they can be made in the required diameter, long runs are laid with fewer fittings. Flexibility and strength are used both to carry water to the plot and to distribute it in the field.
Ni̇ğde · Nigde Organized Industrial Zone
Pipelife Türkiye
Flat Drip Irrigation Pipes
Irrigation Pipe & Hose ProductPipelife flat drip irrigation pipes are produced in 17, 22 and 25 mm diameters. Emitter spacings are 10, 15, 20, 25, 30, 33, 40, 50, 60, 75 and 100 cm. Flows are 0.8, 1.0, 1.6, 2.2, 2.6 and 3.2 l/h. Wall thickness from 0.5 mil to 36 mil covers single-season and multi-year use. The range includes thin, medium and heavy-wall lines with midi, flat micro and flat PC emitters.
Ni̇ğde · Nigde Organized Industrial Zone
Ardent Plastik
Sprinkler irrigation pipes
Irrigation Pipe & Hose ProductThe sprinkler product page restates the former site: pipes from 50 mm to 200 mm, lengths 5.0 / 5.6 / 6.0 m, various working pressures. The solutions page describes rain-like distribution via sprinkler heads. No PN table is published on the current page.
Mersi̇n
Ardent Plastik
HDPE PE100 pipes
Irrigation Pipe & Hose ProductThe HDPE page specifies PE100 to EN 12201-2, TS 418-2 and ISO 4427; σ = 680 MPa, MRS = 10.0 MPa. Black, UV-stabilised; butt fusion or electrofusion. DIN 6–32 bar; wall/weight table 16–400 mm. Uses include potable water, irrigation mains and sewer.
Mersi̇n
Ardent Plastik
Drip irrigation pipes (Drip-X family)
Irrigation Pipe & Hose ProductThe drip page lists round pipe 16 mm at 2/4/8 LPH and 20 mm at 2/4 LPH, working pressure 1.0 bar. Plain wall 16 mm 0.90–1.20 mm and 20 mm 1.00–1.20 mm. PC Q16 2/4 l. Thin-wall HDPE tape 17 and 22 mm, 8–36 mil, emitters 20–100 cm, 0.80 bar, 1–5 seasons. About calls Drip-X / Drip-X PC thick-wall oval pipe with flat emitters.
Mersi̇n
Sarem Makina Sanayi ve Ticaret Ltd. Şti.
PP-RC Pipe Line
Pipe Extrusion LinePP-RC pipe production line.
İstanbul
Sarem Makina Sanayi ve Ticaret Ltd. Şti.
PVC Pipe Production Line
Pipe Extrusion LinePE, PVC, PP-RC, PEX-A & Damlama Boru Üretim Hatları İçin Yüksek Verimli, Projeye Özel Plastik Boru Ekstrüzyon Çözümlerini Sarem Makina’da İnceleyin. Sarem Boru Üretim Hatları boru üretim hatları için yüksek verimli, plastik boru ekstrüzyon. Sarem Makina, PP-RC boru üretim hatları için yüksek verimli ekstrüzyon teknolojileri geliştirir. Sıcak ve soğuk su tesisat borularının üretiminde stabil proses, hassas çap kontrolü ve kaliteli yüzey performansı sunar. Özel tasarlanan PP-RC boru üretim hattı çözümleri; ekstruder, kalıp, vakum tankı, soğutma sistemi, çekici, kesici ve sarıcı ekipmanlarıyla entegre şekilde çalışır. Sarem Makina, üretim kapasitenize uygun komple hat kurulumu & devreye alma desteği sağlar.
İstanbul
Sarem Makina Sanayi ve Ticaret Ltd. Şti.
PE Pipe Extrusion Line
Pipe Extrusion LineSarem Makina, PE, PVC, PEX-A & Damlama Boru Ekstrüzyon Hatları, Otomatik Sarıcılar, Gelişmiş Boru Üretim Makineleri. Anahtar Teslim Makine Çözümleri. Sarem Makina Boru Ekstrüzyon Anahtar Teslim Yüksek Teknoloji Global Çözüm Ortağınız Sarem Makina, plastik boru ekstrüzyon hatlarında mühendislik, üretim & devreye alma süreçlerini tek merkezden yöneten üretim ortağınız. PE, PVC, PP-RC, PEX-A & damlama boru, Pert hatlarında yüksek verim, kararlı üretim ve uzun ömürlü makine performansı hedeflenir. PLASTİK BORU EKSTRÜZYON HATLARIANAHTAR TESLİM BORU ÜRETİM TEKNOLOJİLERİPE, PVC, PP-RC, PEX-A VE DAMLAMA BORU HATLARIOTOMATİK SARICILAREKSTRUDER SİSTEMLERİKALİBRASYON, SOĞUTMA, ÇEKME VE KESME EKİPMANLARIYÜKSEK VERİMLİ MAKİNE ÜRETİMİGLOBAL ENDÜSTRİYEL PROJELER SAREM MAKİNAPLASTİK BORU EKSTRÜZYON HATLARIANAHTAR TESLİM BORU ÜRETİM TEKNOLOJİLERİPE, PVC, PP-RC, PEX-A VE DAMLAMA BORU HATLARIOTOMATİK SARICILAREKSTRUDER SİSTEMLERİKALİBRASYON, SOĞUTMA, ÇEKME VE KESME EKİPMANLARIYÜKSEK VERİMLİ MAKİNE ÜRETİMİGLOBAL ENDÜSTRİYEL PROJELER Sarem Makina Hakkında Sarem Makina, 2006 yılından bu yana plastik boru üretim makineleri ve boru ekstrüzyon hatları geliştiren güçlü bir Türk üreticisidir. PE, PVC, PP-RC, PEX-A ve damlama boru hatlarında mühendislikten üretime, montajdan devreye almaya kadar tüm süreci kendi teknik uzmanlığıyla şekillendirir.
İstanbul
Services in This Category
Approved supplier service catalogs in this category.
Senkron Plastik
Irrigation Fittings Export
Irrigation Pipe & Hose ServiceSenkron expanded exports that began with Iraq in 2002 to more than 70 countries. Couplings, drip accessories and spaghetti pipe are shipped under SENKRON, SUPRA, GREENAQUA, ARHAN and TURAB to agricultural and garden irrigation distributors. Activity is run together with fair participation and product registration by market.
Ankara · OSTIM Organized Industrial Zone
Senkron Plastik
PE Pipe Coupling and Fitting Manufacturing
Irrigation Pipe & Hose ServiceAt the Ostim MegaCenter plant, PP compression couplings, adapters and fittings for PE pipes are injection-moulded. Scope is TS ISO 17885, Ø20–110 mm and PN 16. Blue and black series covering more than 1,200 types are produced for agricultural, garden, landscape and pool systems.
Ankara · OSTIM Organized Industrial Zone
Senkron Plastik
Drip Irrigation Accessory Manufacturing
Irrigation Pipe & Hose ServiceDrip-pipe fittings and drippers have been in the range since 2008. Reducing nipples, adjustable drippers, mini valves and holding parts are moulded to work with 16/20 mm lines and 5–7 mm spaghetti. They are produced for online dripper installation in greenhouse and pot irrigation.
Ankara · OSTIM Organized Industrial Zone
Pipelife Türkiye
ArılıLab Quality Control and Pipe Testing
Irrigation Pipe & Hose ServiceArılıLab is quality control integrated from raw-material verification to final inspection. Systematic testing supports traceability and alignment with potable water, wastewater, gas and agriculture standards. Drip, sprinkler and PE irrigation pipes on the Niğde line are produced under this laboratory discipline.
Ni̇ğde · Nigde Organized Industrial Zone
Pipelife Türkiye
Sprinkler Irrigation System Manufacturing
Irrigation Pipe & Hose ServiceClamped and latch sprinkler pipes are produced in PE 100, 5–6 m lengths, Ø50–200 mm and PN 4–10. The Turkish Patent Institute-approved clamped line is Ø75–160 mm. The system is supplied with latch or clamp joints for rapid field assembly and removal on field crops.
Ni̇ğde · Nigde Organized Industrial Zone
Pipelife Türkiye
Drip Irrigation Pipe Manufacturing
Irrigation Pipe & Hose ServiceThe Niğde OIZ plant extrudes flat drip lines with midi and micro emitters in thin/medium wall and heavy-wall lines with flat PC emitters. Subsurface PC flat drip is produced in 16 and 20 mm, 24 and 36 mil wall, 1.6, 2.1 and 3.4 l/h with anti-siphon emitters. Diameter, spacing and wall are selected for row-crop and orchard projects.
Ni̇ğde · Nigde Organized Industrial Zone
Ardent Plastik
Turnkey irrigation projects
Irrigation Pipe & Hose ServiceThe turnkey page combines site survey, hydraulic calculation, product selection, line/filtration/valve layout, installation support, commissioning and maintenance advice. The import-export page also offers agronomic support, fertigation and greenhouse/hydroponic filtration advice.
Mersi̇n
Ardent Plastik
Sprinkler and HDPE mainline manufacturing
Irrigation Pipe & Hose ServiceProduct pages define sprinkler pipe 50–200 mm / 5.0–6.0 m and PE100 16–400 mm to EN 12201-2. Lines in Mersin serve irrigation mains and sprinkler laterals. The quality page lists TS EN ISO 9261 and TS EN 12201-2+A1.
Mersi̇n
Ardent Plastik
Drip and Drip-X pipe manufacturing
Irrigation Pipe & Hose ServiceAbout states agricultural irrigation pipe production since 1995 and presents Drip-X / Drip-X PC as manufacturer-made oval flat-emitter pipe. Round, plain, PC and thin-wall drip lines are extruded in Mersin and Niğde. The catalogue ties the same lines to the Bor OSB and Mersin plants.
Mersi̇n
Sarem Makina Sanayi ve Ticaret Ltd. Şti.
Turnkey Pipe Plant
Turnkey Extrusion LineComplete plastic pipe plant installation.
İstanbul
Sarem Makina Sanayi ve Ticaret Ltd. Şti.
Production Line Engineering
Turnkey Extrusion LineProject-based extrusion line engineering.
İstanbul
Sarem Makina Sanayi ve Ticaret Ltd. Şti.
Commissioning
Turnkey Extrusion LineInstallation and line commissioning.
İstanbul
Suppliers in This Category
4 suppliers
For buyers
Get quotes from Plastic Extrusion suppliers
Browse verified companies below or describe your need to collect multiple quotes in Plastic Extrusion quickly.
-
Verified profiles and certifications
-
Multiple quotes from one RFQ
-
Filter by capability and location
Browse Related Categories
Discover suppliers in adjacent industrial sectors.
Injection Molding
Specialist companies in Injection Molding.
EPDM Seals
Specialist companies in EPDM Seals.
Custom Injection Molding
Turkish manufacturers and suppliers in Custom Injection Molding.
Molded Plastics
Turkish manufacturers and suppliers in Molded Plastics.
Molded Rubber Goods
Turkish manufacturers and suppliers in Molded Rubber Goods.
Rubber Molding
Turkish manufacturers and suppliers in Rubber Molding.
Plastic Components
Turkish manufacturers and suppliers in Plastic Components.
O-Rings
Turkish manufacturers and suppliers in O-Rings.
Featured Supplier Profiles
Capability, certification, and export profiles with enough suppliers in this category.
Serial Production — Plastic Extrusion manufacturers
78 approved suppliers
Technical standardEN — Plastic Extrusion manufacturers
69 approved suppliers
MaterialPE (Polyethylene) — Plastic Extrusion manufacturers
56 approved suppliers
CertificationISO 9001 certified Plastic Extrusion suppliers
53 approved suppliers
MaterialHDPE — Plastic Extrusion manufacturers
48 approved suppliers
IndustryConstruction — Plastic Extrusion suppliers
42 approved suppliers
CapabilityTube & Hose Extrusion — Plastic Extrusion manufacturers
39 approved suppliers
MaterialPVC — Plastic Extrusion manufacturers
38 approved suppliers
ProcessHigh-Volume Production — Plastic Extrusion manufacturers
38 approved suppliers
MaterialPP (Polypropylene) — Plastic Extrusion manufacturers
32 approved suppliers
IndustryAgriculture — Plastic Extrusion suppliers
31 approved suppliers
IndustryPackaging — Plastic Extrusion suppliers
31 approved suppliers
Featured Product Catalogs
Standard product types with enough suppliers in this category.
Featured Service Catalogs
Standard service types in this category that meet the supplier threshold.
Find the right supplier or list your company
Send RFQs as a buyer or publish your company profile in this category.