Industrial category
Epoxies
Turkish manufacturers and suppliers in Epoxies.
Popular products
Akkim Yapı Kimyasalları Sanayi ve Ticaret A.Ş.
Akfix E300 Waterproof Epoxy Adhesive
AKFIX E300 is a two-component, solvent-free, fast-curing multi-purpose epoxy adhesive. It can be immersed in water after application. Resistant to water and various solvents. Does not shrink after drying. Working time 15–20 min at 23°C; handling 4 h; full cure 24 h. Mix 1:1 by volume. For bonding wood, glass, crystal, ceramic, porcelain, metal, fibreglass and fabric; furniture and household repairs. Not recommended on PP, PE, nylon, PTFE or other flexible plastics. Dual syringe 25 ml.
İstanbul
Akkim Yapı Kimyasalları Sanayi ve Ticaret A.Ş.
Akfix E350 Steel Epoxy Adhesive
AKFIX E350 is a two-component, solvent-free, fast-curing, high-strength epoxy metal adhesive. Gap-filling allows use on rough or poorly matching surfaces. Resin black, hardener clear; final colour black. Working time 4–5 min at 23°C; handling 20 min; full cure 24 h. For bonding metal, concrete, wood, glass and ceramic; repairing machines, appliances, car parts and pipes; setting screws in metal, concrete or stone; sealing electrical parts. Electrically insulating. Dual syringe 25 ml.
İstanbul
Akkim Yapı Kimyasalları Sanayi ve Ticaret A.Ş.
Akfix E340 Quick-Setting Epoxy Adhesive
AKFIX E340 is a two-component, solvent-free, fast-curing, high-strength multi-purpose epoxy adhesive. Mix ratio 1:1 by volume; working time 4–5 min at 23°C; handling 20 min; full cure 24 h. Shore D 80±2 after 7 days. Used for bonding and repairing aluminium, glass, porcelain and ceramic; metal; marine, automotive, caravan and water pipes; tank leaks; engine-block cracks and radiator holes. Dual syringe 25 ml (28.8±0.4 g). Bonded surfaces are ready for use 2 hours after application; can be painted, sanded and drilled.
İstanbul
Tekno Yapı Kimyasalları Sanayi ve Ticaret A.Ş.
Teknobond 401 EP Pure Epoxy Chemical Anchor
Teknobond 401 EP is a pure-epoxy, solvent-free, two-component high-performance cartridge chemical anchor. Used for fixing façades, roofs, timber and metal structures; profiles, columns, beams, consoles, railings, sanitary fittings, cable trays and pipes; post-installed rebar. For cracked and uncracked concrete, lightweight and porous concrete, solid masonry and hollow brick. Non-sag, thixotropic; high chemical resistance, odourless; ETA-19/0201 and ETA-19/0200. Does not contain phenol, DETA/TETA, benzyl alcohol or bisphenol-A.
İstanbul · Istanbul Leather OSB
Popular services
Tekno Yapı Kimyasalları Sanayi ve Ticaret A.Ş.
Structural Strengthening Epoxy Systems
The structural strengthening range includes carbon fibre (TEKNOWRAP), carbon plate (TEKNOPLATE / TEKNOBAR), anchoring epoxies, laminating epoxies and epoxy adhesives. Teknobond 330 saturating resin bonds TEKNOWRAP 300 to concrete; Teknobond 200 is for thin carbon-plate bonding; Teknobond 401 EP is a cartridge pure-epoxy anchor. After-sales application and technical support is given by specialist sales engineers.
İstanbul · Istanbul Leather OSB
Marker Reçine Teknolojileri A.Ş.
Custom Epoxy System Development
Marker Kimya, established entirely with domestic capital, also carries out custom product development for the epoxy system solutions needed in production stages. In 2010 the first advanced laboratory was set up in order to take growing experience in epoxy-system production to different sectors. Marble and electrical/electronics sectors were included. Marker has directed all of its energy toward epoxy systems and has adopted specialization as a core principle.
Mersi̇n
Top industrial zones
Products in This Category
Approved supplier product catalogs in this category.
Akkim Yapı Kimyasalları Sanayi ve Ticaret A.Ş.
Akfix E300 Waterproof Epoxy Adhesive
AKFIX E300 is a two-component, solvent-free, fast-curing multi-purpose epoxy adhesive. It can be immersed in water after application. Resistant to water and various solvents. Does not shrink after drying. Working time 15–20 min at 23°C; handling 4 h; full cure 24 h. Mix 1:1 by volume. For bonding wood, glass, crystal, ceramic, porcelain, metal, fibreglass and fabric; furniture and household repairs. Not recommended on PP, PE, nylon, PTFE or other flexible plastics. Dual syringe 25 ml.
İstanbul
Akkim Yapı Kimyasalları Sanayi ve Ticaret A.Ş.
Akfix E350 Steel Epoxy Adhesive
AKFIX E350 is a two-component, solvent-free, fast-curing, high-strength epoxy metal adhesive. Gap-filling allows use on rough or poorly matching surfaces. Resin black, hardener clear; final colour black. Working time 4–5 min at 23°C; handling 20 min; full cure 24 h. For bonding metal, concrete, wood, glass and ceramic; repairing machines, appliances, car parts and pipes; setting screws in metal, concrete or stone; sealing electrical parts. Electrically insulating. Dual syringe 25 ml.
İstanbul
Akkim Yapı Kimyasalları Sanayi ve Ticaret A.Ş.
Akfix E340 Quick-Setting Epoxy Adhesive
AKFIX E340 is a two-component, solvent-free, fast-curing, high-strength multi-purpose epoxy adhesive. Mix ratio 1:1 by volume; working time 4–5 min at 23°C; handling 20 min; full cure 24 h. Shore D 80±2 after 7 days. Used for bonding and repairing aluminium, glass, porcelain and ceramic; metal; marine, automotive, caravan and water pipes; tank leaks; engine-block cracks and radiator holes. Dual syringe 25 ml (28.8±0.4 g). Bonded surfaces are ready for use 2 hours after application; can be painted, sanded and drilled.
İstanbul
Tekno Yapı Kimyasalları Sanayi ve Ticaret A.Ş.
Teknobond 401 EP Pure Epoxy Chemical Anchor
Teknobond 401 EP is a pure-epoxy, solvent-free, two-component high-performance cartridge chemical anchor. Used for fixing façades, roofs, timber and metal structures; profiles, columns, beams, consoles, railings, sanitary fittings, cable trays and pipes; post-installed rebar. For cracked and uncracked concrete, lightweight and porous concrete, solid masonry and hollow brick. Non-sag, thixotropic; high chemical resistance, odourless; ETA-19/0201 and ETA-19/0200. Does not contain phenol, DETA/TETA, benzyl alcohol or bisphenol-A.
İstanbul · Istanbul Leather OSB
Tekno Yapı Kimyasalları Sanayi ve Ticaret A.Ş.
Teknobond 200 Epoxy Paste
Thixotropic two-component bonding and assembly epoxy developed for thin applications. Used for bonding TEKNOPLATE carbon plates, thin applications, bonding metal plates and granite to glossy surfaces, and fine repairs. Chemical resistant; bonds to concrete, wood and steel; high mechanical strength; non-sag on vertical work; solvent-free. Applied by spatula at 1–1.5 mm on carbon plates.
İstanbul · Istanbul Leather OSB
Tekno Yapı Kimyasalları Sanayi ve Ticaret A.Ş.
Teknobond 330 Epoxy Adhesive and Saturating Resin
Two-component, solvent-free, thixotropic epoxy saturating resin and adhesive. Used for bonding TEKNOWRAP 300 to concrete. Uses: dry application of TEKNOWRAP fibres, primer for wet application, bonding TEKNOBAR plates to even surfaces. Easy to mix; applied with trowel or saturating roller. For hand saturation. Applicable on vertical and overhead surfaces; no separate primer; solvent-free. Mix with a low-speed mixer (max. 400 rpm) for 2–3 minutes until a homogeneous colour is obtained.
İstanbul · Istanbul Leather OSB
Aşy Polymeks Kimya İnş. SAN. Tic. Ltd. Şti.
Polymex CLK-51 Epoxy Abrasive Adhesive
CLK-51 is a solvent-free, high-viscosity, two-component epoxy abrasive (sandpaper) adhesive. The surface must be even, dry and clean and free of mineral oil, dirt, rust and burrs. No foreign material may be added. If ambient or surface temperature is below +10°C or above +30°C, wait for suitable temperatures. Mix the material in the large can first; then pour hardener B into A and mix until homogeneous. Use the mix within 10–12 minutes. Apply to the surface by machine, roller or trowel.
İstanbul
Aşy Polymeks Kimya İnş. SAN. Tic. Ltd. Şti.
Polymex CLK-52 Epoxy Abrasive Adhesive
CLK-52 is a solvent-free, low-viscosity, two-component epoxy abrasive adhesive. Compared with high-viscosity CLK-51 it is a more flowable grade. The surface must be even, dry and clean and free of mineral oil, dirt, rust and burrs. If temperature is below +10°C or above +30°C, wait for suitable conditions. Mix A first, then add hardener B until homogeneous. Use the mix promptly; apply by machine, roller or trowel.
İstanbul
Aşy Polymeks Kimya İnş. SAN. Tic. Ltd. Şti.
Polymex P-5091 Epoxy Ceramic Adhesive
P-5091 is a solvent-free, specially filled epoxy ceramic adhesive based on epoxy resin. It is a gel-paste adhesive and multi-purpose repair mortar developed for tile applications on vibrating systems in industrial plants, R2 class, high bond strength, solvent-free and wipeable with water. Pack A+B 20 kg (A 18.50 kg / B 1.50 kg). Initial shear adhesion 11.3 N/mm², after water immersion 12.3 N/mm², after thermal shock 9.0 N/mm². Compressive strength 30 N/mm² at 1 day and 75 N/mm² at 7 days; application thickness 2.5–35 mm; pot life 1 hour at +20°C.
İstanbul
404 Kimya Sanayi ve Ticaret A.Ş.
404 Power Mix Epoxy Putty
404 Power Mix Epoxy Putty Adhesive is a two-component (A resin – yellow / B hardener – blue), kneadable, high-bond epoxy repair and filling putty. Mixed 1:1 it becomes homogeneous and easy to shape and adheres strongly to the substrate. Depending on ambient temperature it hardens in 15–30 minutes. After cure it can be sanded, drilled and painted. It resists impact and vibration. It is used on metal, PVC, wood, glass and many surfaces. It resists oil, hydrocarbons, acid, base, alcohol and water. Service temperature −30 °C / +120 °C. Pot life about 7–8 minutes at 25 °C. Shore D ≥ 85. Packs 80 g and 40 g.
İstanbul
Alcon Endüstriyel Ürünler San. ve Tic. Ltd. Şti.
Alcon (A) Putty Metal Bond
Alcon (A) Putty Metal Bond is a mixture of epoxy resins and steel powders with very strong adhesion to many metals such as steel and cast iron, to concrete and to some hard plastics. It is used for bonding broken machine parts, filling casting defects and cavities, bonding and repairing drilled tanks, vessels, pipes and flanges, and covering and protecting metal surfaces damaged by friction or abrasion. It is easily applied on vertical surfaces, can be machined on metallic surfaces, and is resistant to chemicals, weak acids, bases and solvents, water and salt water. Mix ratio 9:1 by weight, 2.5:1 by volume. Working time 45 minutes for 500 g at 24 °C. Cure 16 hours. Shore D 85. Tensile strength 22.2 MPa, compressive strength 57 MPa. Maximum dry service temperature 120 °C. Code M-2222, 500 g tin, 10 per carton.
İstanbul
Marker Reçine Teknolojileri A.Ş.
Marker AS-07 Epoxy Adhesive and Adhesion System
Marker AS-07 is a two-component epoxy system used in adhesive, coating and laminating applications. It is used as a primer to increase adhesion before coating. It is used as a laminating resin with glass fibre, carbon fibre and Kevlar-type technical fabrics. It has high water resistance and strong adhesion. It can cure in cold environments and can tolerate ambient and substrate moisture. A 1.5 kg trial pack is offered.
Mersi̇n
Services in This Category
Approved supplier service catalogs in this category.
Tekno Yapı Kimyasalları Sanayi ve Ticaret A.Ş.
Structural Strengthening Epoxy Systems
The structural strengthening range includes carbon fibre (TEKNOWRAP), carbon plate (TEKNOPLATE / TEKNOBAR), anchoring epoxies, laminating epoxies and epoxy adhesives. Teknobond 330 saturating resin bonds TEKNOWRAP 300 to concrete; Teknobond 200 is for thin carbon-plate bonding; Teknobond 401 EP is a cartridge pure-epoxy anchor. After-sales application and technical support is given by specialist sales engineers.
İstanbul · Istanbul Leather OSB
Marker Reçine Teknolojileri A.Ş.
Custom Epoxy System Development
Marker Kimya, established entirely with domestic capital, also carries out custom product development for the epoxy system solutions needed in production stages. In 2010 the first advanced laboratory was set up in order to take growing experience in epoxy-system production to different sectors. Marble and electrical/electronics sectors were included. Marker has directed all of its energy toward epoxy systems and has adopted specialization as a core principle.
Mersi̇n
Suppliers in This Category
8 suppliers
For buyers
Get quotes from Epoxies suppliers
Browse verified companies below or describe your need to collect multiple quotes in Epoxies quickly.
-
Verified profiles and certifications
-
Multiple quotes from one RFQ
-
Filter by capability and location
Browse Related Categories
Discover suppliers in adjacent industrial sectors.
Adhesives
Turkish manufacturers and suppliers in Adhesives.
Industrial Adhesives
Turkish manufacturers and suppliers in Industrial Adhesives.
Sealants
Turkish manufacturers and suppliers in Sealants.
Adhesive Tapes
Turkish manufacturers and suppliers in Adhesive Tapes.
Pressure Sensitive Tapes
Turkish manufacturers and suppliers in Pressure Sensitive Tapes.
Adhesive Dispensing Equipment
Turkish manufacturers and suppliers in Adhesive Dispensing Equipment.
Glue
Turkish manufacturers and suppliers in Glue.
Film Adhesives
Turkish manufacturers and suppliers in Film Adhesives.
Featured Supplier Profiles
Capability, certification, and export profiles with enough suppliers in this category.
Two-Part Epoxy — Epoxies manufacturers
8 approved suppliers
CapabilityStructural Epoxy — Epoxies manufacturers
8 approved suppliers
MaterialEpoxy Resin — Epoxies manufacturers
8 approved suppliers
IndustryConstruction — Epoxies suppliers
8 approved suppliers
IndustryChemicals — Epoxies suppliers
8 approved suppliers
ProcessSerial Production — Epoxies manufacturers
8 approved suppliers
ProcessHigh-Volume Production — Epoxies manufacturers
8 approved suppliers
CertificationISO 9001 certified Epoxies suppliers
6 approved suppliers
ExportEpoxies suppliers exporting to Germany
6 approved suppliers
Technical standardEN — Epoxies manufacturers
6 approved suppliers
ExportEpoxies suppliers exporting to United Arab Emirates
5 approved suppliers
ExportEpoxies suppliers exporting to Saudi Arabia
5 approved suppliers
Find the right supplier or list your company
Send RFQs as a buyer or publish your company profile in this category.