Service description
More services from this company
Pyrinox
Precision Lost-Wax Investment Casting
Investment Casting ServiceProduction of complex metal parts by the lost-wax method with linear tolerances down to ±0.20 mm and Ra 1.6 µm as-cast surface finish. Minimum 2 mm wall thickness, a 5 g–120 kg part range and 0° draft are possible. More than 2,500 active grades can be cast in steel, stainless, nickel, cobalt and aluminium.
İstanbul
Pyrinox
Heat Treatment for Nickel Alloy Castings
Heat Treatment ServiceControlled heat treatment for nickel alloy castings performed entirely in-house: solution annealing to homogenise the microstructure, and precipitation hardening and ageing for hardenable grades such as Inconel 718. All treatments run under protective nitrogen or argon atmosphere, with microstructure verification on every batch.
İstanbul
Related services
Gedik
Investment Casting
Investment Casting ServiceInvestment casting runs in Gedik Casting’s 6,000 m² advanced casting plant. Wax injection uses two horizontal and five vertical presses; the ceramic line has four continuous baths, one spray unit and two fluidised beds. Wax patterns are shelled, dewaxed and poured—producing small complex parts in steel alloys, aluminium and stainless with minimal machining. Plant quality is certified to ISO 9001, IATF 16949, AD 2000-W0 and classification society approvals.
İstanbul
Pyrinox
Precision Lost-Wax Investment Casting
Investment Casting ServiceProduction of complex metal parts by the lost-wax method with linear tolerances down to ±0.20 mm and Ra 1.6 µm as-cast surface finish. Minimum 2 mm wall thickness, a 5 g–120 kg part range and 0° draft are possible. More than 2,500 active grades can be cast in steel, stainless, nickel, cobalt and aluminium.
İstanbul
Serpa Hassas Döküm
Mould Design and Manufacture
Investment Casting ServiceMould design and manufacture are carried out in-house. Investment-casting patterns and moulds are prepared for the lost-wax process in steel, stainless, copper, aluminium and superalloys. Moulding, casting and machining share the Tuzla Leather OIZ plant.
İstanbul · Istanbul Leather OSB
Serpa Hassas Döküm
Vacuum Investment Casting
Investment Casting ServiceSerpa’s 2004 vacuum induction furnace investment was a major step for vacuum investment casting in Turkey. Vacuum casting is used for nickel- and cobalt-based superalloys and for steel and stainless parts that require that process. Work is run under ISO 9001 and AS9100 quality systems.
İstanbul · Istanbul Leather OSB