Service description
More services from this company
Pyrinox
Precision Lost-Wax Investment Casting
Investment Casting ServiceProduction of complex metal parts by the lost-wax method with linear tolerances down to ±0.20 mm and Ra 1.6 µm as-cast surface finish. Minimum 2 mm wall thickness, a 5 g–120 kg part range and 0° draft are possible. More than 2,500 active grades can be cast in steel, stainless, nickel, cobalt and aluminium.
İstanbul
Pyrinox
Rapid Prototyping with 3D Printing
Investment Casting ServiceWax patterns are printed directly from the 3D CAD model instead of injection tooling and enter the standard lost-wax process: printing, cleaning, ceramic coating, melting and casting. The result is a cast metal sample in the real production alloy, from a single piece, with no tooling cost, delivered in days rather than weeks.
İstanbul
Related services
Termosan Isıl İşlem Sanayi ve Ticaret A.Ş.
Stress Relieving
Heat Treatment ServiceInternal stresses built up during thermal or mechanical processing can push parts out of tolerance or cause failures in service. Stress-relief annealing reduces stresses without changing basic material properties: the part is heated and held so yield and tensile strength drop enough to relax residual stress. The process typically runs for several hours at 500–650 °C with slow controlled heating and cooling. It is used for large or complex parts, welded assemblies and products with tight dimensional tolerance.
İstanbul
Termosan Isıl İşlem Sanayi ve Ticaret A.Ş.
Continuous Line Heat Treatment
Heat Treatment ServiceTermosan’s continuous lines consist of two high-capacity, fully automated furnaces that can apply processes such as quench-and-temper and carbonitriding automatically in sequence. Gas atmosphere-controlled continuous furnaces support annealing, hardening, tempering and special process needs; capacity has scaled from 170 kg/h lines to 300 and 500 kg/h. Used for serial heat treatment where precision matters, especially automotive and fastener parts.
İstanbul
Termosan Isıl İşlem Sanayi ve Ticaret A.Ş.
Metallography Laboratory
Heat Treatment ServiceTermosan operates a purpose-built metallography laboratory with skilled staff to verify processes and approve products. Equipment includes Rockwell, Brinell and Micro-Vickers hardness testers, a metal microscope and automatic sample-preparation units for hardness measurement, microstructure analysis and ASTM grain-size analysis. Supports post-heat-treatment quality verification and customer approval workflows.
İstanbul
Vesta Isıl İşlem
Stress Relief
Heat Treatment ServiceStress relief enables controlled reduction of residual stresses that metals accumulate during casting, forging, machining, welding and heat treatment. It is applied to non-hardened materials (e.g. after rough machining) and hardened–worked materials, as well as after welding, wire EDM and sinker EDM. On molds and parts that run at high temperature, such as metal injection molds, it extends life and improves dimensional stability.
Kocaeli · TOSB Otomotiv Tedarik Sanayi Ihtisas Organized Industrial Zone