Service description

Poloptech performs high-precision tactile measurement, continuous 3D scanning and form and profile inspection on a Hexagon GLOBAL S 7.10.7 Scan+ / Accuracy+ / Throughput+ CMM. The measuring volume is 700 × 1000 × 660 mm. The sensor is an HP-S-X1H high-accuracy 3D scanning probe on a motorised HH-AS8-T2.5 head with 12,240 index positions. Stated performance at 18–22 °C is a volumetric length error MPE(E0/E150) of 1.2 + L/350 µm, a scanning form error MPE(THP) of 2.0 µm and repeatability MPL(R0) of 1.2 µm. Flatness, roundness, cylindricity, position, concentricity and runout are measured to GD&T. Deviation analysis is run in PC-DMIS CAD++ against IGES/STEP models.

More services from this company

Custom Optical Coatings — Poloptech Optik ve Uzay Sanayi Ticaret A.Ş.

Poloptech Optik ve Uzay Sanayi Ticaret A.Ş.

Custom Optical Coatings

Optical Coatings Service

Poloptech designs and applies optical coatings to customer requirements and carries out the necessary tests before delivery. The facility has plasma-assisted e-beam evaporation chambers, thermal evaporators, a plasma-enhanced chemical vapour deposition system (PECVD) and an etcher to remove coating on both IR optics and typical glasses. Coatings are applied in the UV, visible, NIR, MWIR and LWIR regions, and dual-band and triple-band combinations are possible. DLC coating is offered in MWIR and LWIR and also in the visible region on glasses and flexible optics. ITO coating is offered in the visible and NIR regions, and hydrophobic coatings are available for visible and IR. Transmittance and reflectance spectra are measured, and sheet resistance on ITO-coated optics is verified with a 4-point probe.

Ankara

Optical and Optomechanical Design — Poloptech Optik ve Uzay Sanayi Ticaret A.Ş.

Poloptech Optik ve Uzay Sanayi Ticaret A.Ş.

Optical and Optomechanical Design

Design Services Service

Poloptech provides consulting and technical support, in Turkey and abroad, for the design, production and integration of optical systems. It supports companies in the precision optics sector on the design, production, integration, maintenance and testing of optical systems. Production and testing of large optics used in satellite cameras and astronomical telescopes, which require special production and precision measurement techniques, are carried out to customer requirements. For optical system integration, an Opti-Centric alignment device is used so that lenses are positioned correctly relative to one another.

Ankara

Related services

CMM Measurement and Quality Control — Alp Havacılık Sanayi ve Ticaret A.Ş.

Alp Havacılık Sanayi ve Ticaret A.Ş.

CMM Measurement and Quality Control

CMM Inspection / Quality Control

Quality-control equipment includes CMMs, portable CMMs, profile projectors, Johnson gear measuring equipment, Micro-Hite electronic height gauges and a calibration lab. Metallurgy and chemical labs support metallographic sample prep, micro/Rockwell hardness, tensile/compression, alloy, conductivity and corrosion tests; NDT covers fluorescent penetrant, magnetic particle, ECI and etch inspections.

Eskişehir · Eskisehir Organized Industrial Zone

CMM Inspection and Quality Control — Aycan Havacılık

Aycan Havacılık

CMM Inspection and Quality Control

CMM Inspection / Quality Control

Part-specific quality equipment, CMMs and Tracer systems verify aerospace tight tolerances. FAI (First Article Inspection) is among engineering capabilities; dimensional checks use probes such as Renishaw MH20i. Under the AS9100D quality management system, customer specifications and process requirements are tracked with measurement records.

Eskişehir · 75th Year SME Organized Industrial Zone

CMM Inspection / Quality Control — Alkan Makina

Alkan Makina

CMM Inspection / Quality Control

CMM Inspection / Quality Control

Capabilities explicitly lists in-production probing and CMM reports. The Quality page states quality as the main goal of production. Alkan Makina treats high quality as a principle for precision machining and tight-tolerance sheet forming, with production carried out in a 1000 m² closed area.

Ankara · OSTIM Organized Industrial Zone

3D CMM Measuring — Art Tech Kalıp

Art Tech Kalıp

3D CMM Measuring

CMM Inspection / Quality Control

Detailed measurement is carried out at every stage of production in line with high quality standards. Measurements are made on two Coord3 Hera SP 10.7.7 3D CMM machines (1200 x 1000 mm) and the results are written into reports shared with customers. Project data is stored securely so the same product can be produced again years later.

İstanbul · Dudullu Organized Industrial Zone

Ready to Find Your Next Manufacturing Partner?

Explore Turkish manufacturers and industrial suppliers on TurkIndustry. Discover potential sourcing partners, submit RFQs and compare quotations — all from one platform.

Start Sourcing Today →