Service description
More services from this company
İstanbul Isıl İşlem San. ve Tic. A.Ş.
Plasma Nitriding of Stainless Steels
Nitriding ServiceUsing i-nit pulsed plasma nitriding furnaces and the i-nit Process control system, the wear resistance of stainless steels such as AISI 304, AISI 316L and AISI 420 and duplex grades such as 1.4462 is increased without reducing corrosion resistance. The low-temperature process allows the gas composition to determine the nitride or S-phase (expanded austenite) layer formed on the surface. Optimum process conditions are defined together with the customer based on where the part is used and the properties expected.
İstanbul
İstanbul Isıl İşlem San. ve Tic. A.Ş.
Post-Oxidation and Vacuum Heat Treatment (Tempering, Stress Relieving)
Heat Treatment ServiceOxidation performed after nitriding is called post-oxidation; it forms a thin Fe3O4 (magnetite) layer on the steel surface to increase corrosion resistance. The company also performs tempering and stress relieving in vacuum furnaces. Its vacuum heat treatment equipment includes in-house built vacuum tempering furnaces and a 600 kg capacity vacuum tempering furnace.
İstanbul
Related services
İstanbul Isıl İşlem San. ve Tic. A.Ş.
Plasma Nitriding of Stainless Steels
Nitriding ServiceUsing i-nit pulsed plasma nitriding furnaces and the i-nit Process control system, the wear resistance of stainless steels such as AISI 304, AISI 316L and AISI 420 and duplex grades such as 1.4462 is increased without reducing corrosion resistance. The low-temperature process allows the gas composition to determine the nitride or S-phase (expanded austenite) layer formed on the surface. Optimum process conditions are defined together with the customer based on where the part is used and the properties expected.
İstanbul
Orion Isı Teknoloji Sanayi ve Ticaret A.Ş.
Turnkey Nitriding and Oxidation Facility Installation
Nitriding ServiceOrion provides all the equipment, technical infrastructure, process consultancy and application support needed for turnkey nitriding and oxidation facility installation under one roof, including installation and commissioning. Nitriding molds, shock absorber shafts and many other parts in-house reduces outsourcing costs and keeps operational control within the business.
İstanbul
Tşt Yüzey İşlem
Arcor Coating
Nitriding ServiceARCOR is a liquid nitrocarburizing process. Nitrogen and carbon are diffused into steel and iron-based alloys in special salt baths at about 500–600°C. The result is a hard, black, porous protective layer on the outer surface. Salt-spray resistance of several hundred hours is the stated target; surface hardness, wear and fatigue strength increase, and seizure in sliding contact is reduced. Because it runs cooler than many other heat treatments, the risk of size change and distortion is lower. It is used on gas-spring rods, hydraulic and pneumatic cylinder rods, engine parts, gears, bushings and connecting pins.
Bursa · Nilufer Organized Industrial Zone
Tşt Yüzey İşlem
Gas Nitriding
Nitriding ServiceGas nitriding is a surface-hardening process in which nitrogen atoms are diffused into steel and cast-iron parts. TŞT runs it in controlled-atmosphere gas-nitriding furnaces, hardening only the outer layer while leaving the core unchanged and keeping dimensional stability as wear resistance increases. Because the process is carried out below the steel’s structural transformation temperature, bending, warping or loss of size is not expected and no extra grinding is required afterwards. The surface layer adds fatigue and corrosion strength. It is applied to engine components, camshafts and crankshafts, piston pins, gearbox gears, and lift-shock-absorber and hydraulic-cylinder rods.
Bursa · Nilufer Organized Industrial Zone