Service description
Machine park and production capabilities
Capabilities defined on the company profile (read-only)
- Bottero 8 istasyonlu Jumbo kesim
- Bottero lamine cam kesim
- Isıcam üretim hattı
- Southtech tam konveksiyonel temper fırını
Quality and certifications
Certifications defined on the company profile (read-only)
- CE Marking
- TSE
More services from this company
Avcıoğlu CAM
Float-glass cutting line
Construction Materials ServiceOur 8-station Bottero Jumbo cutting line cuts glass to accurate dimensions with a clean edge. The line is integrated with a Bottero automatic loading system, taking worker safety and high-capacity demand into account. The target is millimetric cutting and serial production in jumbo sizes.
Ankara · Ankara Sanayi Odasi I. Organized Industrial Zone
Avcıoğlu CAM
Tempering line
Construction Materials ServiceOur Southtech fully convective tempering furnace is suited to next-generation coated and triple-silver glasses. Production follows TS EN 12150, with attention to safety, surface quality and dimensional accuracy. Loading capacity 5000 × 2600 mm; smallest size 350 × 350 mm; 4 mm maximum 2000 × 1000 mm; 5 mm and above 3000 × 2000 mm. Temperable Low-E and Solar Low-E glasses are processed.
Ankara · Ankara Sanayi Odasi I. Organized Industrial Zone
Related services
Tepe Betopan Yapı Malzemeleri San. Tic. A.Ş.
Product and Application Technical Support
Construction Materials ServiceTepe Betopan provides application and product selection support via [email protected]. The document centre publishes product sheets, catalogues and technical documents; installation videos (e.g. riveted fixing) cover correct dry cutting, stacking and handling. Product pages state application limits such as minimum exterior thickness outside prefab use, production direction and sizing rules; after-sales guidance is routed through the dealer network.
Ankara
Tepe Betopan Yapı Malzemeleri San. Tic. A.Ş.
Custom-Size Board Cutting and Dimensioning
Construction Materials ServiceCement-bonded particle and fiber cement boards in standard production sizes can be cut in width and length for custom dimensions; non-standard thicknesses and formats are arranged with the factory. For Tepe Unique Pro® facade supply, factory-cut sized panels are delivered rather than full sheets; product documents require observing production direction during design/installation and mandate dry cutting. Boards cut with wet methods fall outside warranty.
Ankara
Tepe Betopan Yapı Malzemeleri San. Tic. A.Ş.
FireEx® Fire-Resistant Ventilated Facade System
Construction Materials ServiceFireEx® is a ventilated facade system with A2 reaction-to-fire classification; the system is non-combustible. It has five main components: load-bearing wall, anchorage/profile substructure, mineral wool insulation, minimum 20 mm ventilation cavity and cladding board. By board type it is offered as FireEx Basic (cement-bonded / Betopanplus group), FireEx Ultra (tepePAN group) and FireEx Unique (Tepe Unique Pro group); Basic/Ultra use galvanized L-J-M profiles, Unique uses aluminium L-T profiles.
Ankara
Asyol Asfalt Taahhüt Ticaret Sanayi A.Ş.
Asphaltic Concrete Paving and Compaction
Construction Materials ServiceThe asphaltic concrete mixture is hauled to the laying site by dump trucks. It is paved by electronically sensored pavers to the specified grades and compacted by pneumatic-tyred and tandem rollers. Where load or dimension limits prevent standard plant, mini pavers or vibrating screeds are used for laying and mini rollers and plate compactors for compaction. Aggregate and bitumen specification, mix gradation and bitumen content, mixture temperature, base resistance and paving/compaction compliance are checked at every stage.
Ankara