Product description
More from this company
UMS Metal Sanayi
Ceiling C Power Profile
Construction Materials ProductLoad-bearing profile for plasterboard suspended ceiling metal substructures, cold formed from hot-dip galvanized steel. Its special design gives one-gauge-higher performance than equivalents of the same thickness and is protected by a Utility Model Certificate. Thickness 0.40–0.60 mm, 60x27x6 mm section, 3000 mm standard length (2000–8000 mm on request), DX51D (EN 10346), Z100/Z140/Z275 coating, A1 fire class.
Ankara · OSTIM Organized Industrial Zone
UMS Metal Sanayi
Wall C Stud Profile
Construction Materials ProductLoad-bearing member for the metal substructure of partition walls, lining walls, suspended ceilings and exterior facades, cold formed from hot-dip galvanized steel. Thickness 0.45–0.80 mm, 3000 mm standard length (2000–8000 mm on request), DX51D (EN 10346), Z100/Z140/Z275 coating, A1 fire class, yield strength ≥140 N/mm². Sizes from Wall C 48 to Wall C 150.
Ankara · OSTIM Organized Industrial Zone
Related products
Birlik Galvaniz
Galvanized and Pre-painted Trapezoidal Sheet
Trapezoidal / Roofing SheetGalvanized and pre-painted trapezoidal sheets are produced in the 27/200 profile on two separate trapezoidal lines. Sheet thickness is 0.30–1.00 mm, sheet width 1000/860 mm, 1200/1040 mm and 1250/1050 mm, and sheet length 2000–12000 mm. Each line has a daily capacity of 40 tons; the sheets are used for roof and facade cladding.
Kocaeli · Kocaeli Gebze VI(IMES)Makine Ihtisas Organized Industrial Zone
Sergen Metal Dış Ticaret ve Sanayi Ltd. Şti.
Sinusoidal Corrugated Sheet
Trapezoidal / Roofing SheetSinusoidal corrugated sheet in 18/76 profile; thickness 0.35 - 0.80 mm, length up to 12.5 metres. Offers easy and fast installation on roofs and facades, and its light weight saves on supporting structure. Paint over galvanized steel extends the life of the zinc layer; an economical product for perimeter walls.
İstanbul · Dudullu Organized Industrial Zone
Ünallar Metal A.Ş.
Prepainted Trapezoidal Sheet 27-200
Trapezoidal / Roofing SheetSingle-skin trapezoidal sheet roll-formed from prepainted galvanized coil in the 27/200 profile. Formed width 860 mm from 1000 mm (800 mm effective) and 1050 mm from 1200 mm (1000 mm effective). Thickness 0.30–1.00 mm, length 600–14000 mm; distributed load tables are given by purlin span and gauge. Protective film on request.
Ankara · Ankara Sanayi Odasi 2.ve 3. Organized Industrial Zone
KMC Kayseri Metal Center San. ve Tic. A.Ş.
Trapezoidal roofing sheet
Trapezoidal / Roofing SheetThe trapezoidal line forms sheet at 0.27–0.90 mm thickness, up to 1250 mm width and 12 t coil weight. Feedstock is converted from cold, hot, galvanized, prepainted, Alusi and Aluzinc coils. Cut sheets are supplied for roof and façade use.
Kayseri · Kayseri Organized Industrial Zone