UMS Metal Sanayi
Ankara · Yenimahalle
UMS Metal Sanayi
Manufacturer of suspended ceiling, partition wall, exterior facade, light gauge steel and solar profiles with an annual 120 thousand ton Steel Service Center and 150 million metre profile production capacity.
About
Production profile
Company type
Activity types
Production capabilities
Materials worked
Certifications
Export profile
Industries served
Activity categories
Target export markets
Norway
Sweden
Denmark
France
United States
Map
Factory gallery
Products
Wall C Stud Profile
Load-bearing member for the metal substructure of partition walls, lining walls, suspended ceilings and exterior facades, cold formed from hot-dip galvanized steel. Thickness 0.45–0.80 mm, 3000 mm standard length (2000–8000 mm on request), DX51D (EN 10346), Z100/Z140/Z275 coating, A1 fire class, yield strength ≥140 N/mm². Sizes from Wall C 48 to Wall C 150.
Galvanized 27/200 Trapezoidal Sheet
Produced by roll forming galvanized and pre-painted galvanized coil into the 27/200 section; the 5-rib type gives 800 mm and the 6-rib type 1000 mm net coverage width for roofs and facades. Thickness 0.30–1.20 mm, width 860–1040 mm, length 100–13000 mm, 50–350 g/m² coating. DX51D–DX56D+Z and S220–S350 GD+Z steels; polyester, PVDF, plastisol, PVC paint in all RAL colours.
Ceiling C Power Profile
Load-bearing profile for plasterboard suspended ceiling metal substructures, cold formed from hot-dip galvanized steel. Its special design gives one-gauge-higher performance than equivalents of the same thickness and is protected by a Utility Model Certificate. Thickness 0.40–0.60 mm, 60x27x6 mm section, 3000 mm standard length (2000–8000 mm on request), DX51D (EN 10346), Z100/Z140/Z275 coating, A1 fire class.
Services
Cut-to-Length (Flat Sheet)
The cut-to-length line, where coils are cut into flat sheets, has two levelling units for double straightening and produces to very tight flatness tolerance. Capacity 40,000 tons/year, maximum coil weight 20 tons, width 300–1250 mm, thickness 0.25–3.00 mm, length 300–10000 mm and speed 50 m/min.
Light Gauge Steel Construction
The design and detailing team designs the project technically and structurally, the required profiles are produced on UMS machines, the assembly team screws the profiles into panels and the panels are joined on site. Profiles have 63–300 mm web, 40–75 mm flange, 0–20 mm lip, 0.75–2.5 mm thickness, 100–275 g/m² galvanizing and S235–S550 steel grade, for houses, modular buildings, warehouses and roof trusses.
Coil Slitting
On the slitting line of the Steel Service Center, galvanized and pre-painted galvanized coils are slit with circular knives into slit coils. The line has a capacity of 50,000 tons/year, a maximum coil weight of 20 tons and a speed of 150 m/min, processing widths of 25–1550 mm and thicknesses of 0.25–4.00 mm.