Product description
Technical specifications
- Minimum order (MOQ)
- 1 pcs
More from this company
Metcam
Fire-Resistant Glass
Construction Materials ProductThe fire page says Pilkington fire glass creates safe, bright spaces. Class E Pyroclear provides integrity (E30 6–10 mm, E60 8–10 mm); class EW Pyrodur adds radiation control; class EI Pyrostop adds insulation. Pyrostop is low-iron Optiwhite laminated with a clear interlayer that foams in fire and absorbs flame. Wired glass is listed as Pyroshield 2. Pyroclear is described as CE-marked to EN 12150 and EN 1279.
İstanbul
Metcam
Solar Control Glass
Construction Materials ProductThe solar-control page states that the glass reduces solar heat gain while transmitting a high level of natural daylight. Heat is controlled by reflection, transmittance and absorption. Soft-coat listings include the Pilkington Suncool series; hard-coat listings include Eclipse Advantage, Solar-E, Eclipse and Reflite. Body-tinted glasses listed are Arctic Blue, SuperGrey and EverGreen. In hot spaces the glass reflects a large share of solar radiation while still admitting light.
İstanbul
Related products
Tepe Betopan Yapı Malzemeleri San. Tic. A.Ş.
Betopan® Cement-Bonded Particle Board
Construction Materials ProductBetopan® is a functional cement-bonded particle board that combines cement and wood, with a flat natural grey surface usable from foundation to roof. Standard thicknesses are 8–30 mm; sizes 1250×2500, 1250×2800 and 1250×3000 mm. Density 1300±50 kg/m³, bending strength ≥9 N/mm², reaction to fire B-s1,d0 (EN 13501-1). Typical uses include prefabricated and steel buildings, interior/exterior walls, floors, wet-area tile backing and roof underlayment; asbestos-free, does not rot or mould.
Ankara
Tepe Betopan Yapı Malzemeleri San. Tic. A.Ş.
tepePAN® Fiber Cement Board
Construction Materials ProducttepePAN® is a multi-purpose flat fiber cement building board made from cement and fiber, offered with decorative stone, wood, brick and embossed textures. Thicknesses 6–20 mm, width 1250 mm, lengths 2500/2800/3000 mm (2500 mm for 18–20 mm). Density 1150±75 kg/m³, reaction to fire A1 (EN 13501-1), durability Category A Class 2. Applied by mechanical fixing in ventilated rainscreen facades; used on interior walls, floors, wet areas and exteriors. For non-prefab exterior use, minimum 10 mm thickness is required.
Ankara
Tepe Betopan Yapı Malzemeleri San. Tic. A.Ş.
tepePAN Pro® Pressed Fiber Cement Board
Construction Materials ProducttepePAN Pro® is a pressed, high-performance flat fiber cement board for exterior cladding and interior use, offered in a 10–16 mm thickness range. Natural raw materials give a cream tone; Flat and Line sanded finishes are available, and paint or coatings can create decorative surfaces. It is mechanically fixed in ventilated rainscreen facades and used on interior/exterior walls, floors and wet areas in residential, public, industrial and prefabricated buildings.
Ankara
Asyol Asfalt Taahhüt Ticaret Sanayi A.Ş.
Asphaltic Concrete
Construction Materials ProductQuarried rock is relieved of dirt on a by-pass screen, crushed and classified in jaw, impact and hammer crushers, then stored as asphaltic concrete aggregate. Aggregate is dried in the batch-type asphalt plant dryer at up to 160 °C, rescreened into hot bins, weighed to the job-mix formula and mixed with bitumen. The mixture is the hot asphaltic concrete used for paving.
Ankara