Product description
More from this company
Tepe Betopan Yapı Malzemeleri San. Tic. A.Ş.
Betopan® Cement-Bonded Particle Board
Construction Materials ProductBetopan® is a functional cement-bonded particle board that combines cement and wood, with a flat natural grey surface usable from foundation to roof. Standard thicknesses are 8–30 mm; sizes 1250×2500, 1250×2800 and 1250×3000 mm. Density 1300±50 kg/m³, bending strength ≥9 N/mm², reaction to fire B-s1,d0 (EN 13501-1). Typical uses include prefabricated and steel buildings, interior/exterior walls, floors, wet-area tile backing and roof underlayment; asbestos-free, does not rot or mould.
Ankara
Tepe Betopan Yapı Malzemeleri San. Tic. A.Ş.
tepePAN Pro® Pressed Fiber Cement Board
Construction Materials ProducttepePAN Pro® is a pressed, high-performance flat fiber cement board for exterior cladding and interior use, offered in a 10–16 mm thickness range. Natural raw materials give a cream tone; Flat and Line sanded finishes are available, and paint or coatings can create decorative surfaces. It is mechanically fixed in ventilated rainscreen facades and used on interior/exterior walls, floors and wet areas in residential, public, industrial and prefabricated buildings.
Ankara
Related products
Asyol Asfalt Taahhüt Ticaret Sanayi A.Ş.
Asphaltic Concrete
Construction Materials ProductQuarried rock is relieved of dirt on a by-pass screen, crushed and classified in jaw, impact and hammer crushers, then stored as asphaltic concrete aggregate. Aggregate is dried in the batch-type asphalt plant dryer at up to 160 °C, rescreened into hot bins, weighed to the job-mix formula and mixed with bitumen. The mixture is the hot asphaltic concrete used for paving.
Ankara
Asyol Asfalt Taahhüt Ticaret Sanayi A.Ş.
Decorative Coloured and Patterned Asphalt
Construction Materials ProductThe mixture is prepared in a batch-type plant at 160 °C from 0-5 mm aggregate suitable for asphaltic concrete wearing course with about 6-7 percent 50-70 penetration bitumen, depending on filler. Laying is at least 4 cm by electronically sensored paver or vibratory screed. After initial compaction with a 1.5-3.0 ton tandem roller, steel templates (brick, cobblestone, herringbone) are pressed in; when the surface cools, ACRYL-LATEX epoxy-modified StreetBond coating is applied in one or two coats. Used on pedestrian ways, sidewalks, parks and other decorative areas.
Ankara
Asyol Asfalt Taahhüt Ticaret Sanayi A.Ş.
Cold Packaged Asphalt
Construction Materials ProductUsed for local repairs in cold climates where hot-mix asphalt is scarce. Aggregate is mixed with bitumen and chemicals in the batch plant and sacked; each sack weighs 25 kg. The mix stays soft at low temperatures, can be applied on wet surfaces and needs no prior coating. Shelf-life is 6 months; do not stack more than 10 sacks. The pothole should be 4-5 cm deep with perpendicular cleaned edges; the mix is poured with a slight bump and compacted with a mini roller or plate compactor.
Ankara
İda Güven
Pumice Block
Construction Materials ProductPumice (bims) is an economical and environmentally minded building material produced from natural volcanic stone. It does not overload the structural system and provides strength through high compressive capacity. Its natural structure makes it an A1 non-combustible material. The porous body supports heat and sound insulation; it is produced without chemical additives and is recyclable. Smooth faces and light weight shorten application time on site.
Aksaray · Kirimli Organized Industrial Zone