Product description
Technical specifications
- Minimum order (MOQ)
- 1 pcs
More from this company
Camglass
Heat-strengthened glass
Construction Materials ProductIn the tempering furnace it is cooled with lower blowing pressure (about 20%) than fully tempered glass. It sits between float and fully tempered; the break pattern is closer to float and there is no nickel-sulphide spontaneous breakage risk. About 2× stronger. Common in insulating-glass production.
İstanbul
Camglass
Fully tempered glass
Construction Materials ProductTempering heats glass to 650–700 °C and cools it with compressed air. Surface compression and core tension make it about 5× stronger than annealed glass; it breaks into small pieces (safety glass). No cutting, drilling or edge work after tempering. Thickness 6–8–10–12–15–19 mm; max 2800×5000 mm (min 150×350); 4 mm max 2850×2200. EN 12150 / EN 12600. Facades, showers, furniture, railings, white goods.
İstanbul
Related products
Tepe Betopan Yapı Malzemeleri San. Tic. A.Ş.
Betopan® Cement-Bonded Particle Board
Construction Materials ProductBetopan® is a functional cement-bonded particle board that combines cement and wood, with a flat natural grey surface usable from foundation to roof. Standard thicknesses are 8–30 mm; sizes 1250×2500, 1250×2800 and 1250×3000 mm. Density 1300±50 kg/m³, bending strength ≥9 N/mm², reaction to fire B-s1,d0 (EN 13501-1). Typical uses include prefabricated and steel buildings, interior/exterior walls, floors, wet-area tile backing and roof underlayment; asbestos-free, does not rot or mould.
Ankara
Tepe Betopan Yapı Malzemeleri San. Tic. A.Ş.
tepePAN® Fiber Cement Board
Construction Materials ProducttepePAN® is a multi-purpose flat fiber cement building board made from cement and fiber, offered with decorative stone, wood, brick and embossed textures. Thicknesses 6–20 mm, width 1250 mm, lengths 2500/2800/3000 mm (2500 mm for 18–20 mm). Density 1150±75 kg/m³, reaction to fire A1 (EN 13501-1), durability Category A Class 2. Applied by mechanical fixing in ventilated rainscreen facades; used on interior walls, floors, wet areas and exteriors. For non-prefab exterior use, minimum 10 mm thickness is required.
Ankara
Tepe Betopan Yapı Malzemeleri San. Tic. A.Ş.
tepePAN Pro® Pressed Fiber Cement Board
Construction Materials ProducttepePAN Pro® is a pressed, high-performance flat fiber cement board for exterior cladding and interior use, offered in a 10–16 mm thickness range. Natural raw materials give a cream tone; Flat and Line sanded finishes are available, and paint or coatings can create decorative surfaces. It is mechanically fixed in ventilated rainscreen facades and used on interior/exterior walls, floors and wet areas in residential, public, industrial and prefabricated buildings.
Ankara
Asyol Asfalt Taahhüt Ticaret Sanayi A.Ş.
Asphaltic Concrete
Construction Materials ProductQuarried rock is relieved of dirt on a by-pass screen, crushed and classified in jaw, impact and hammer crushers, then stored as asphaltic concrete aggregate. Aggregate is dried in the batch-type asphalt plant dryer at up to 160 °C, rescreened into hot bins, weighed to the job-mix formula and mixed with bitumen. The mixture is the hot asphaltic concrete used for paving.
Ankara