Product description
Technical specifications
- Minimum order (MOQ)
- 1 ton
More from this company
Ağrı Çimento (arkoz Madencilik)
CEM II/A-LL 42,5 R
Construction Materials ProductCEM II/A-LL 42,5 R Portland Limestone Cement (TSE EN 197-1) is a limestone-blended Portland cement suitable for general use. It is produced in accordance with EN 197-1 with a minimum 80% clinker content, up to 20% limestone, and gypsum as a set regulator. Typical uses: high/early strength; cold weather; prefabricated; tunnel formwork; ready-mix; cast-in-place; construction chemicals; foundations; reinforced/high-rise structures; roads; RCC roads; slipform; water tanks; blocks/curbs; aerated concrete; fiber cement; general purpose; prestressed concrete.
Ağri
Ağrı Çimento (arkoz Madencilik)
CEM II/A-M (P-L) 42,5 R
Construction Materials ProductIt is obtained by grinding Portland cement clinker together with additives defined in the standards (pozzolan, limestone, etc.), a set regulator (gypsum) and a minor additional constituent. Workability is higher than Portland cement. Heat of hydration is lower than Portland cement. CO2 emissions are lower than Portland cement. Typical uses: high/early strength; cold weather; prefabricated; tunnel formwork; ready-mix; cast-in-place; construction chemicals; foundations; reinforced/high-rise structures; roads; RCC roads; slipform; water tanks; blocks/curbs; aerated concrete; fiber cement; general purpose; prestressed concrete.
Ağri
Related products
Tepe Betopan Yapı Malzemeleri San. Tic. A.Ş.
Betopan® Cement-Bonded Particle Board
Construction Materials ProductBetopan® is a functional cement-bonded particle board that combines cement and wood, with a flat natural grey surface usable from foundation to roof. Standard thicknesses are 8–30 mm; sizes 1250×2500, 1250×2800 and 1250×3000 mm. Density 1300±50 kg/m³, bending strength ≥9 N/mm², reaction to fire B-s1,d0 (EN 13501-1). Typical uses include prefabricated and steel buildings, interior/exterior walls, floors, wet-area tile backing and roof underlayment; asbestos-free, does not rot or mould.
Ankara
Tepe Betopan Yapı Malzemeleri San. Tic. A.Ş.
tepePAN® Fiber Cement Board
Construction Materials ProducttepePAN® is a multi-purpose flat fiber cement building board made from cement and fiber, offered with decorative stone, wood, brick and embossed textures. Thicknesses 6–20 mm, width 1250 mm, lengths 2500/2800/3000 mm (2500 mm for 18–20 mm). Density 1150±75 kg/m³, reaction to fire A1 (EN 13501-1), durability Category A Class 2. Applied by mechanical fixing in ventilated rainscreen facades; used on interior walls, floors, wet areas and exteriors. For non-prefab exterior use, minimum 10 mm thickness is required.
Ankara
Tepe Betopan Yapı Malzemeleri San. Tic. A.Ş.
tepePAN Pro® Pressed Fiber Cement Board
Construction Materials ProducttepePAN Pro® is a pressed, high-performance flat fiber cement board for exterior cladding and interior use, offered in a 10–16 mm thickness range. Natural raw materials give a cream tone; Flat and Line sanded finishes are available, and paint or coatings can create decorative surfaces. It is mechanically fixed in ventilated rainscreen facades and used on interior/exterior walls, floors and wet areas in residential, public, industrial and prefabricated buildings.
Ankara
Asyol Asfalt Taahhüt Ticaret Sanayi A.Ş.
Asphaltic Concrete
Construction Materials ProductQuarried rock is relieved of dirt on a by-pass screen, crushed and classified in jaw, impact and hammer crushers, then stored as asphaltic concrete aggregate. Aggregate is dried in the batch-type asphalt plant dryer at up to 160 °C, rescreened into hot bins, weighed to the job-mix formula and mixed with bitumen. The mixture is the hot asphaltic concrete used for paving.
Ankara