Şahan Elektrostatik Toz Boya ve Bağlantı Elemanları A.Ş.
Mani̇sa · Yunusemre
Şahan Elektrostatik Toz Boya ve Bağlantı Elemanları A.Ş.
Şahan, founded in 1986, applies electrostatic powder coating in Manisa OSB on 15,000 m2 indoor / 24,000 m2 total — 4 lines, 600 m2 per hour.
About
Şahan Electrostatic Powder Coating facilities were established in 1986, served in Torbalı-Izmir between 1994-2008, and in the meantime established a second plant in Manisa Organized Industrial Zone. Four powder-painting lines on 15,000 m2 closed and 24,000 m2 total area give 600 m2 per hour capacity. The four automatic painting lines are based on spray pretreatment with tunnel-type drying and curing ovens. Painting is mainly applied with automatic guns, and also manual applications where needed. Chemical pretreatment is based on zinc phosphate, with iron phosphate as alternative. ISO 9001 was certified in 2007. Electrostatic powder coating is widely used in white goods, automotive, electronics, heating, cooling, cast parts and other metal appliances.
Production profile
Company type
Activity types
Production capabilities
Machine park
Materials worked
Manufacturing processes
Technical standards
Certifications
Export profile
Industries served
Activity categories
Target export markets
Germany
Factory gallery
Products
Zinc-Phosphate Pretreatment
Chemical pretreatment is based on zinc phosphate coating, with iron phosphate as alternative. Şahan uses this pretreatment before the powder lines. ISO 9001 has certified quality-at-source since 2007. Coating weight is set to part geometry.
Electrostatic Powder Coating
Electrostatic powder coating is Şahan’s main output. Four automatic lines with tunnel drying and curing ovens give 600 m2 per hour. It is applied in the 15,000 m2 indoor Manisa OSB plant. Film thickness is measured to the customer specification.
Blasted Surface
Services
Chemical Pretreatment
Chemical pretreatment is listed as a Şahan product on MOSB. It is zinc-phosphate based, with iron phosphate as alternative. ISO 9001 quality-at-source covers all process steps. Bath concentration is held to part type.
Blasting
Blasting is the surface-preparation service on the MOSB product card. It can be applied to cast and sheet parts before powder coating. The Manisa 3rd-section plant offers this preparation with the paint lines. Pressure and grit follow surface roughness.
Powder-Coating Application
Powder-coating application has been Şahan’s core service since 1986. Four automatic lines run spray pretreatment, tunnel drying and curing ovens. Capacity in Manisa OSB is 600 m2 per hour. The process is set to part hangers and gun programmes.