Pusmak Makina A.Ş.
Kayseri · Melikgazi
Pusmak Makina A.Ş.
Kayseri-based manufacturer, founded in 2009, of high-pressure polyurethane and polyurea spray machines and equipment.
About
Production profile
Company type
Activity types
Production capabilities
Materials worked
Export profile
Industries served
Activity categories
Target export markets
South Korea
North Macedonia
Saudi Arabia
Italy
Map
Location is approximate, based on the address. · © OpenStreetMap
Factory gallery
Products
KPX 20+ Polyurea Machine
The hydraulically driven KPX 20+ precisely proportions two components for a homogeneous mix in polyurea and spray foam work. It delivers 200 bar / 2900 psi spray pressure, an 11,200 W preheating system and hose heating compatible with different heated hose types. Automatic phase sequencing, error-control automation and a phase control/correction system are included. The set ships with two transfer pumps, a heated hose and a polyurea spray gun, and is used for waterproofing roofs, water tanks and industrial surfaces.
KPX 20 Polyurethane Foam Machine
Pusmak's hydraulically driven KPX 20 proportioner is designed for spray foam applicators and mixes two components at a 1:1 ratio. It offers 140 bar / 2030 psi maximum working pressure, a 9.6 kW preheater and 6 kW hose heating, 5.7 kg/min maximum output and up to 75 m hose length. Error-control automation with pressure tolerance limits and error history plus a phase control and correction system are included. Weight 295 kg, 230/400 V 3-phase 50/60 Hz.
KPX 40 High Capacity Polyurethane Foam and Polyurea Machine
KPX 40 is a dual-hose polyurethane foam and polyurea machine where two applicators can work at the same time, with a larger proportioner and hydraulic system for extra performance. Maximum output is 10.3 kg/min at a 1:1 mix ratio, maximum working pressure 200 bar / 2900 psi, preheater power 12.4 kW and installed power 23.5 kW. Maximum hose length is 105 m and weight 315 kg, with precise heat and pressure control plus real-time monitoring and reporting.
Services
Custom-Configured Polyurethane Machine Manufacturing
Pusmak offers more than 15 machine options and can adapt the machine electrical system to requirements; machines can be built to run on 220 V or 380 V supply. For sites with power problems, generator and compressor integrated versions of all models are manufactured. Heated hose length can be extended up to 90/110 m depending on the machine; sets are delivered ready to use with transfer pumps, a spray gun kit and a 63 m heated hose.
Polyurethane Machine Spare Parts and Service
Because Pusmak machines are domestically produced, maintenance and spare part supply are not delayed. Parts offered include cartridge sets, check valves, nozzles, O-ring sets and mandrels for the spray gun; electrical sockets, heat sensors and thermocouples for heated hoses; and check valve maintenance kits, air pistons and material pistons for transfer pumps. Two-part video guides cover spray gun maintenance and cleaning.
Polyurethane Application and Raw Material Consulting
Pusmak supports customers on all types of chemical raw materials along with the machine. It provides tables based on scientific data for raw material consumption per square metre and notes that ambient temperature, machine heat and pressure balance, substrate condition and applicator skill can change consumption by 5-10%. It advises on machine selection for polyurethane spray foam (wall, roof, pipe insulation) and polyurea (waterproofing) work and on what to check when buying a used machine.