Industrial category
Trapezoidal Sheets
Turkish suppliers of trapezoidal sheets and corrugated cladding for roof and facade.
Top industrial zones
Products in This Category
Approved supplier product catalogs in this category.
Uzman Metalurji İnşaat Otomotiv Sanayi ve Ticaret Limited Şirketi
Trapezoidal Roofing Saddle Washer with EVA Backing
Trapezoidal Sheets ProductUzman Metalurji trapezoidal roofing saddle washers are metal accessories used at screw fastening points on trapezoidal sheets. The shaped surface helps distribute the pressure from the screw head over a wider area. EVA backing is applied to the underside.TECHNICAL FEATURES• Material: Pre-painted galvanized steel.• Steel thickness: 0.30 mm.• Underside: EVA backing.• Available colours: RAL 9002, RAL 3009 and RAL 7016.• Applications: Trapezoidal roof and wall sheet fastenings.Selection should consider the sheet profile, rib crown width and fastening screw. Please provide a cross-section or relevant dimensions before ordering. Watertightness depends on the complete fastening detail, including the appropriate screw, sealing washer, installation position and tightening setting.Uzman Metalurji has manufactured roofing accessories in Konya, Türkiye since 2003. We supply distributors, building material suppliers and installation contractors exclusively wholesale.For pricing and lead times, please specify the sheet profile, colour, quantity and delivery destination.
Konya · Konya Organized Industrial Zone
Uzman Metalurji İnşaat Otomotiv Sanayi ve Ticaret Limited Şirketi
Roof-to-Wall Flashing for Sandwich Panel and Trapezoidal Roofs
Trapezoidal Sheets ProductUzman Metalurji roof-to-wall flashings cover junctions between roof coverings and walls and help direct rainwater onto the roof surface. Models are available for trapezoidal sheet and sandwich panel roof profiles.TECHNICAL FEATURES• Material: Pre-painted galvanized steel.• Steel thickness: 0.35 mm.• Sheet blank dimensions for the trapezoidal model: 250 × 1100 mm.• Sheet blank dimensions for the sandwich panel model: 250 × 1200 mm.• Available colours: RAL 9002, RAL 3009 and RAL 7016.APPLICATIONS• Roof-to-wall junctions.• Wall connections on trapezoidal sheet roofs.• Wall connections on sandwich panel roofs.• Roof finishing details suitable for the project.Selection should consider the roof profile, rib spacing, roof pitch and wall junction detail. Please provide the panel or sheet model, a cross-section image and relevant dimensions before ordering. Watertightness depends on appropriate overlaps, fasteners, sealing materials and correct installation.Uzman Metalurji has manufactured metal and plastic roofing accessories in Konya, Türkiye since 2003. We supply distributors, building material suppliers and installation contractors exclusively wholesale.For pricing and lead times, please specify the model, colour, quantity and delivery destination.
Konya · Konya Organized Industrial Zone
Birlik Galvaniz
Galvanized and Pre-painted Corrugated Sheet
Trapezoidal Sheets ProductGalvanized and pre-painted corrugated sheets are produced in the 815/18 profile on the corrugating line. Sheet thickness is 0.25–0.80 mm, sheet width 1000/875 mm and sheet length 2000–6000 mm. The corrugating line has a daily capacity of 30 tons; the sheets are used in roof and facade cladding applications.
Kocaeli · Kocaeli Gebze VI(IMES)Makine Ihtisas Organized Industrial Zone
Sergen Metal Dış Ticaret ve Sanayi Ltd. Şti.
Trapezoidal Sheet (27/200 and 38/151 Profiles)
Trapezoidal Sheets ProductTrapezoidal sheet produced in 27/200 and 38/151 profiles from galvanized or pre-painted steel at the Dudullu OSB factory. Used for roof and facade cladding; painted coils are processed from stock colours such as RAL 9002, 3009, 6020, 9006 and 7016. Can be supplied together with matching ridge pieces in the same profile and colour.
İstanbul · Dudullu Organized Industrial Zone
Sergen Metal Dış Ticaret ve Sanayi Ltd. Şti.
Composite Floor Deck Sheet (52/992)
Trapezoidal Sheets ProductThe 52/992 composite floor deck profile ensures integrity between concrete and steel in composite structures, providing concrete savings and high strength. Produced from galvanized sheet in 0.70 - 1.50 mm thicknesses with a net covering width of 992 mm. Cut to the required lengths, maximum length 15 metres.
İstanbul · Dudullu Organized Industrial Zone
Mersin Ulusoy Demir Çelik Grup
Trapezoidal Sheet
Trapezoidal Sheets ProductOn the trapezoidal sheet line, coils are passed through the roll former and shaped into 27/200, 18/76.2, 58/915 and 38/151 sections, producing 0.2 mm - 1.2 mm galvanized, painted or unpainted trapezoidal sheet. The line runs fully or semi-automatically at 20-35 m/min depending on the profile. Used in construction, roof and facade cladding and the iron and steel industry; 17 RAL colour options are offered.
Mersin · Mersin 2nd Organized Industrial Zone
Mersin Ulusoy Demir Çelik Grup
Standing Seam Sheet
Trapezoidal Sheets ProductStanding seam sheets are produced in flat, double-rib and single-rib options. It is a new-generation roof cladding system offering trouble-free solutions especially for detailed and low-pitch roofs. Used on low-pitch roofs, circular and barrel-vault roofs, and in residential, social and industrial buildings; offered in RAL colour options.
Mersin · Mersin 2nd Organized Industrial Zone
Teksac San. Tic. Ltd. Şti.
27/200 Single-Layer Trapezoidal Sheet
Trapezoidal Sheets ProductSingle-layer trapezoidal sheet in the 27/200 profile, made from pre-painted galvanised steel or aluminium for facades and roofs. Any RAL colour, with polyester, PVC or other coatings depending on exposure. Thickness 0.40–1 mm; BGS sheet, multi-span, L/200 deflection limit. At 0.5 mm and 100 cm purlin spacing it carries 457 kg/m². Suitable for steep roofs and exterior facades.
Kocaeli
Teksac San. Tic. Ltd. Şti.
38/151 Single-Layer Trapezoidal Sheet
Trapezoidal Sheets ProductSingle-layer trapezoidal sheet in the 38/151 profile, made from pre-painted galvanised steel or aluminium for roofs and facades. RAL colour choice and polyester, PVC or other coatings are available. Thickness 0.40–1 mm; BGS sheet, multi-span, L/200 deflection limit. At 100 cm purlin spacing it carries 863 kg/m² at 0.5 mm and 1727 kg/m² at 1 mm. Used on steep roofs and exterior facades.
Kocaeli
Teksac San. Tic. Ltd. Şti.
55/900 Single-Layer Trapezoidal Sheet
Trapezoidal Sheets ProductSingle-layer trapezoidal sheet in the 55/900 profile, made from pre-painted galvanised steel or aluminium for roofs and facades. RAL colour choice and polyester, PVC or other coatings are available. Thickness 0.40–0.90 mm; BGS sheet, multi-span, L/200 deflection limit. A load table covers 150–400 cm purlin spacing; at 0.5 mm and 150 cm it carries 780 kg/m². Suitable for steep roofs and exterior facades.
Kocaeli
Trapez Trifon
50/207 Trapezoidal Sheet
Trapezoidal Sheets Product50/207 trapezoidal sheet is published as painted galvanized or galvanized single skin for roof, facade and concrete decking, five ribs. Uninsulated solutions in About include painted galvanized, aluminium and galvanized trapezoidal. Dispatch and installation are from Osmangazi, Bursa.
Bursa
Trapez Panel
45/150 Trapezoidal Sheet
Trapezoidal Sheets Product45/150 trapezoidal sheet has 7 ribs, 45 mm / 150 mm and 900 mm net width. The same galvanized/aluminium and polyester-PVDF-plastisol coating applies. The deeper rib is used on longer-span roofs. Max length 16 m.
İstanbul
Services in This Category
Approved supplier service catalogs in this category.
Birlik Galvaniz
Roller Shutter Sheet Forming Service
Trapezoidal Sheets ServiceOn the roller shutter line, galvanized and pre-painted sheets are formed into roller shutter sheets in the 804/9 profile. Sheet thickness is 0.25–0.50 mm, sheet width 1000/834 mm and sheet length 1000–3000 mm. The line has a daily capacity of 20 tons.
Kocaeli · Kocaeli Gebze VI(IMES)Makine Ihtisas Organized Industrial Zone
Teksac San. Tic. Ltd. Şti.
Trapezoidal Profile Production
Trapezoidal Sheets ServiceOn our trapezoidal sheet lines we produce single-layer trapezoidal sheet in the 27/200, 38/151 and 55/900 profiles from pre-painted galvanised steel or aluminium in the required length. RAL colours and polyester, PVC or other coatings are offered. Thickness ranges from 0.40 to 1 mm, with load tables per purlin spacing for each profile. Intended for roof and facade projects.
Kocaeli
Trapez Trifon
Double-Skin Site-Applied Roof
Trapezoidal Sheets ServiceDouble-skin site-applied roof cladding has its own product/service page. Uninsulated trapezoidal sheet is combined with in-situ sandwich application. Osmangazi crews install on site. Installation experience since 1992 is stated in About.
Bursa
Trapez Panel
Architectural Services
Trapezoidal Sheets ServiceSchematic, construction and detail drawings, 3D Max, reinforced-concrete statics and quantity take-off are listed under architecture. Bespoke design is stated in About. Trapezoidal cladding details are solved by the same team. Work is run from Sancaktepe.
İstanbul
Trapez Panel
Trapezoidal Roof and Facade Installation
Trapezoidal Sheets ServiceThe services page lists trapezoidal roof and facade sales, application and installation. Steel construction contracting is under the same heading. Production is in Gebze and Düzce; projects are run from the Sancaktepe office. Installation is done with engineers and partners.
İstanbul
Trapez Panel
Engineering Services
Trapezoidal Sheets ServiceStructural, mechanical and electrical application drawings and surveying are under engineering on the site. Project-specific design and detailing are stated in About. Surveys are done from Sancaktepe. 3D and schematic design are offered with architecture.
İstanbul
Ege Panel Endüstri
Trapezoidal and Sheet Processing
Trapezoidal Sheets ServiceThe About page lists trapezoidal, press-brake and shear investments. Sheet, pipe, profile and mill products are completed from stock. The industrial line shares the Torbalı campus with sandwich production. Delivery is planned to the project address.
İzmir
Mekpan Panel
Trapezoidal Sheet Production
Trapezoidal Sheets ServiceTrapezoidal sheets are listed as a separate Mekpan product group. Single-skin trapezoidal sheet is used on roofs and facades that do not need insulation. Coil ships from the same Konya plant as the panel lines. Thickness and profile follow the order.
Konya · Büyükkayacık Organized Industrial Zone
SHN Sönmez Grup
Trapezoidal Sheet Supply
Trapezoidal Sheets ServiceTrapezoidal sheet, coil and roof accessories are supplied on the same channel as sandwich-panel orders. Painted galvanized coil is specified to ECCA norms. Delivery is planned to the project address from Mersin. Polycarbonate sheet and panel are also listed in the range.
Mersin
Hacıoğlu Metal & Yapı
Tam Trapez Sheet Production
Trapezoidal Sheets ServiceFelt-backed Tam Trapez sheet is produced at the İzmit plant. Non-condensing sheet is cut for roof and facade cladding in requested colours. Coil is roll-formed to a trapezoidal profile; dispatch leaves the D-130 stock yard. Production is packed in the same warehouse as sandwich-panel supply.
Kocaeli
Suppliers in This Category
17 suppliers
For buyers
Get quotes from Trapezoidal Sheets suppliers
Browse company profiles below or describe your need to collect multiple quotes in Trapezoidal Sheets quickly.
-
Company profiles and certifications
-
Multiple quotes from one RFQ
-
Filter by capability and location
Featured Supplier Profiles
Capability, certification, and export profiles with enough suppliers in this category.
Trapezoidal Roof Sheets — Trapezoidal Sheets manufacturers
17 listed suppliers
MaterialGalvanized Steel — Trapezoidal Sheets manufacturers
17 listed suppliers
IndustryConstruction — Trapezoidal Sheets suppliers
17 listed suppliers
MaterialAluminum — Trapezoidal Sheets manufacturers
11 listed suppliers
ProcessSerial Production — Trapezoidal Sheets manufacturers
10 listed suppliers
Technical standardEN — Trapezoidal Sheets manufacturers
10 listed suppliers
CapabilityTrapezoidal Facade Cladding — Trapezoidal Sheets manufacturers
8 listed suppliers
CertificationISO 9001 certified Trapezoidal Sheets suppliers
8 listed suppliers
MaterialPolyurethane — Trapezoidal Sheets manufacturers
8 listed suppliers
CertificationTSE certified Trapezoidal Sheets suppliers
7 listed suppliers
IndustryFood — Trapezoidal Sheets suppliers
7 listed suppliers
IndustryAgriculture — Trapezoidal Sheets suppliers
7 listed suppliers
Featured Product Catalogs
Standard product types with enough suppliers in this category.
Featured Service Catalogs
Standard service types in this category that meet the supplier threshold.
Find the right supplier or list your company
Send RFQs as a buyer or publish your company profile in this category.