Industrial category
Irrigation Pipe & Hose
Turkish manufacturers of PE irrigation pipe, drip irrigation pipe, sprinkler pipe and watering hose.
Top industrial zones
Products in This Category
Approved supplier product catalogs in this category.
Palaplast
Layflat PVC Irrigation Hoses
Irrigation Pipe & Hose ProductSUN-FLOW and PM GROUP layflat PVC irrigation hoses are produced in 2 inch (53 mm), 2½ inch (65 mm) and 3 inch (78 mm) inside diameter. The SF-10 blue line is about 5.4 atm working pressure and the SF-55 grey line about 10 atm; packing is 50 m coils. They are laid as flat hose for field mains and drip/sprinkler offtakes.
İzmi̇r · Menemen Plastik Ihtisas Organized Industrial Zone
Palaplast
Paladrip PE Drip Irrigation Pipe
Irrigation Pipe & Hose ProductPaladrip is a PE dripline with embodied emitters. 16 mm is produced at 2.0 and 3.4 l/h, 20–100 cm spacing, 400 m coils (100 m option at 33 cm). 20 mm is offered at 1.8, 3.3 and 7.4 l/h in 300 m coils (100 m at 33 cm). Black field line and brown Garden-Plast packing are listed.
İzmi̇r · Menemen Plastik Ihtisas Organized Industrial Zone
Palaplast
LDPE Irrigation Pipes
Irrigation Pipe & Hose ProductDRIP-PAL LDPE irrigation pipes are produced in 16, 20, 25 and 32 mm OD in black and brown. Coil lengths are 25/50/100/300 m for 16 and 20 mm, 25/50/100/250 m for 25 mm and 25/50/100/200 m for 32 mm. They are used as mains/laterals for online drippers, micro-sprinklers and drip lines in garden and field irrigation.
İzmi̇r · Menemen Plastik Ihtisas Organized Industrial Zone
Pipelife Türkiye
Clamped and Latch Sprinkler Pipes
Irrigation Pipe & Hose ProductARILI/PIPELIFE clamped sprinkler systems are produced in Ø75, 90, 110, 125, 140 and 160 mm. The latch system covers Ø50 mm to Ø200 mm. Pipes are made from high-density polyethylene in 5 and 6 m lengths, PN 4, 6, 8 and 10, in PE 100. They are assembled and removed in field sprinkler irrigation with leak-tight joints even at low pressure.
Ni̇ğde · Nigde Organized Industrial Zone
Pipelife Türkiye
PE Agricultural Irrigation Pipes
Irrigation Pipe & Hose ProductPolyethylene irrigation pipes are used as main, sub-main and lateral lines. They are produced from black compound with well-dispersed UV stabilizer for sunlight resistance in farm, garden and field use. Because they can be made in the required diameter, long runs are laid with fewer fittings. Flexibility and strength are used both to carry water to the plot and to distribute it in the field.
Ni̇ğde · Nigde Organized Industrial Zone
Pipelife Türkiye
Flat Drip Irrigation Pipes
Irrigation Pipe & Hose ProductPipelife flat drip irrigation pipes are produced in 17, 22 and 25 mm diameters. Emitter spacings are 10, 15, 20, 25, 30, 33, 40, 50, 60, 75 and 100 cm. Flows are 0.8, 1.0, 1.6, 2.2, 2.6 and 3.2 l/h. Wall thickness from 0.5 mil to 36 mil covers single-season and multi-year use. The range includes thin, medium and heavy-wall lines with midi, flat micro and flat PC emitters.
Ni̇ğde · Nigde Organized Industrial Zone
Ardent Plastik
Sprinkler irrigation pipes
Irrigation Pipe & Hose ProductThe sprinkler product page restates the former site: pipes from 50 mm to 200 mm, lengths 5.0 / 5.6 / 6.0 m, various working pressures. The solutions page describes rain-like distribution via sprinkler heads. No PN table is published on the current page.
Mersi̇n
Ardent Plastik
HDPE PE100 pipes
Irrigation Pipe & Hose ProductThe HDPE page specifies PE100 to EN 12201-2, TS 418-2 and ISO 4427; σ = 680 MPa, MRS = 10.0 MPa. Black, UV-stabilised; butt fusion or electrofusion. DIN 6–32 bar; wall/weight table 16–400 mm. Uses include potable water, irrigation mains and sewer.
Mersi̇n
Ardent Plastik
Drip irrigation pipes (Drip-X family)
Irrigation Pipe & Hose ProductThe drip page lists round pipe 16 mm at 2/4/8 LPH and 20 mm at 2/4 LPH, working pressure 1.0 bar. Plain wall 16 mm 0.90–1.20 mm and 20 mm 1.00–1.20 mm. PC Q16 2/4 l. Thin-wall HDPE tape 17 and 22 mm, 8–36 mil, emitters 20–100 cm, 0.80 bar, 1–5 seasons. About calls Drip-X / Drip-X PC thick-wall oval pipe with flat emitters.
Mersi̇n
Sunstream
Hypernova flat integral dripline
Irrigation Pipe & Hose ProductHypernova is a flat integral, non-PC, clog-resistant dripline. Spec PDF: nominal diameters 16 / 22 / 25 mm; wall 6–24 mil (0.15–0.60 mm). Nominal flow at 1 bar is 1.2 / 1.6 / 2.0 / 3.2 lph; filtration 125 micron / 120 mesh; spacing 15–120 cm. Thin wall is for a single season and medium wall for multi-season use, under ISO 9261.
Çanakkale · Canakkale Organized Industrial Zone
Sunstream
Parallax drip tape
Irrigation Pipe & Hose ProductParallax is drip tape with a continuous-flow-path labyrinth for on-surface and subsurface use. Spec PDF: diameters 16 / 22 / 25 mm; wall 6–16 mil (0.15–0.40 mm). Nominal flow is 0.6 / 0.9 / 1.2 / 1.5 lph at 0.7 bar and 0.7 / 1.0 / 1.4 / 1.8 lph at 1 bar. Filtration 125 micron / 120 mesh; emitter spacing 10–60 cm; ISO 9261. The PDF states emitter CV below 3%.
Çanakkale · Canakkale Organized Industrial Zone
Sunstream
Dynomin cylindrical integral dripline
Irrigation Pipe & Hose ProductDynomin is a cylindrical integral, non-pressure-compensating dripline. The Sunstream spec PDF lists four outlets; nominal diameters 16 and 20 mm; wall 32–48 mil (0.80–1.20 mm). Nominal flow at 1 bar is 2.0 / 4.0 lph; filtration 125 micron / 120 mesh; spacing 20–120 cm; ISO 9261. At 16 mm the inner diameter is 13.8 mm and working pressure is 2.5–4.0 bar by wall thickness.
Çanakkale · Canakkale Organized Industrial Zone
Services in This Category
Approved supplier service catalogs in this category.
Palaplast
Irrigation Network Technical Support
Irrigation Pipe & Hose ServicePalaplast specialized staff provide technical support for every irrigation network. The company is ISO 9001 certified. Support for product selection and network installation is given from catalogues and technical sheets covering drip, sprinkler and hydroponic systems through artificial-rain applications.
İzmi̇r · Menemen Plastik Ihtisas Organized Industrial Zone
Palaplast
Dripline Manufacturing
Irrigation Pipe & Hose ServicePaladrip embodied-emitter line is produced at 16 mm 2.0–3.4 l/h and 20 mm 1.8–7.4 l/h. Emitter spacing is 20–100 cm; coils are 100/300/400 m. The Menemen production centre runs PE dripline extrusion for agricultural irrigation together with the Greece-based product range.
İzmi̇r · Menemen Plastik Ihtisas Organized Industrial Zone
Palaplast
LDPE/HDPE Irrigation Pipe Manufacturing
Irrigation Pipe & Hose ServiceThe range includes LDPE DRIP-PAL 16–32 mm coils and HDPE 80/100 irrigation/potable pipes. Annual capacity exceeds 10,000 tonnes; more than 4,000 order codes cover agricultural irrigation, potable water and heating lines. The Türkiye production centre operates together with shipments to more than 70 countries.
İzmi̇r · Menemen Plastik Ihtisas Organized Industrial Zone
Pipelife Türkiye
ArılıLab Quality Control and Pipe Testing
Irrigation Pipe & Hose ServiceArılıLab is quality control integrated from raw-material verification to final inspection. Systematic testing supports traceability and alignment with potable water, wastewater, gas and agriculture standards. Drip, sprinkler and PE irrigation pipes on the Niğde line are produced under this laboratory discipline.
Ni̇ğde · Nigde Organized Industrial Zone
Pipelife Türkiye
Sprinkler Irrigation System Manufacturing
Irrigation Pipe & Hose ServiceClamped and latch sprinkler pipes are produced in PE 100, 5–6 m lengths, Ø50–200 mm and PN 4–10. The Turkish Patent Institute-approved clamped line is Ø75–160 mm. The system is supplied with latch or clamp joints for rapid field assembly and removal on field crops.
Ni̇ğde · Nigde Organized Industrial Zone
Pipelife Türkiye
Drip Irrigation Pipe Manufacturing
Irrigation Pipe & Hose ServiceThe Niğde OIZ plant extrudes flat drip lines with midi and micro emitters in thin/medium wall and heavy-wall lines with flat PC emitters. Subsurface PC flat drip is produced in 16 and 20 mm, 24 and 36 mil wall, 1.6, 2.1 and 3.4 l/h with anti-siphon emitters. Diameter, spacing and wall are selected for row-crop and orchard projects.
Ni̇ğde · Nigde Organized Industrial Zone
Ardent Plastik
Turnkey irrigation projects
Irrigation Pipe & Hose ServiceThe turnkey page combines site survey, hydraulic calculation, product selection, line/filtration/valve layout, installation support, commissioning and maintenance advice. The import-export page also offers agronomic support, fertigation and greenhouse/hydroponic filtration advice.
Mersi̇n
Ardent Plastik
Sprinkler and HDPE mainline manufacturing
Irrigation Pipe & Hose ServiceProduct pages define sprinkler pipe 50–200 mm / 5.0–6.0 m and PE100 16–400 mm to EN 12201-2. Lines in Mersin serve irrigation mains and sprinkler laterals. The quality page lists TS EN ISO 9261 and TS EN 12201-2+A1.
Mersi̇n
Ardent Plastik
Drip and Drip-X pipe manufacturing
Irrigation Pipe & Hose ServiceAbout states agricultural irrigation pipe production since 1995 and presents Drip-X / Drip-X PC as manufacturer-made oval flat-emitter pipe. Round, plain, PC and thin-wall drip lines are extruded in Mersin and Niğde. The catalogue ties the same lines to the Bor OSB and Mersin plants.
Mersi̇n
Sunstream
Sprinkler irrigation pipe manufacturing
Irrigation Pipe & Hose ServiceCompany history says sprinkler pipes and fittings production started in 2012. The sprinkler range and pipes.pdf list latch PE 100 pipe Ø50–125 mm, PN 6 bar, lengths 5 / 5.85 / 6 m. It is made at the Çanakkale factory alongside the dripline lines.
Çanakkale · Canakkale Organized Industrial Zone
Sunstream
Drip-tape manufacturing
Irrigation Pipe & Hose ServiceAbout history states Sunstream became the first Turkish company to make drip tape (Parallax) in 2014. The product page and spec PDF describe continuous-labyrinth tape in 16 / 22 / 25 mm diameters and 6–16 mil wall. It is extruded at the İSKO Çanakkale OSB plant as part of the dripline range.
Çanakkale · Canakkale Organized Industrial Zone
Sunstream
Integral-dripper dripline manufacturing
Irrigation Pipe & Hose ServicePer Sunstream About, cylindrical (Dynomin) and flat (Hypernova) integral driplines are made at the Çanakkale plant. Dynomin/Macronova lines started in 1999; the Çanakkale factory opened in 2008. In 2016 the plant reached 20,000 m² and 17 lines. Production is under ISO 9001 and ISO 9261 for emitters/pipe.
Çanakkale · Canakkale Organized Industrial Zone
Suppliers in This Category
5 suppliers
For buyers
Get quotes from Irrigation Pipe & Hose suppliers
Browse verified companies below or describe your need to collect multiple quotes in Irrigation Pipe & Hose quickly.
-
Verified profiles and certifications
-
Multiple quotes from one RFQ
-
Filter by capability and location
Featured Supplier Profiles
Capability, certification, and export profiles with enough suppliers in this category.
Serial Production — Irrigation Pipe & Hose manufacturers
22 approved suppliers
IndustryAgriculture — Irrigation Pipe & Hose suppliers
21 approved suppliers
Technical standardEN — Irrigation Pipe & Hose manufacturers
21 approved suppliers
MaterialHDPE — Irrigation Pipe & Hose manufacturers
19 approved suppliers
ProcessPrototype Production — Irrigation Pipe & Hose manufacturers
19 approved suppliers
Technical standardDIN — Irrigation Pipe & Hose manufacturers
19 approved suppliers
CapabilityPE Irrigation Pipe — Irrigation Pipe & Hose manufacturers
18 approved suppliers
MaterialPE (Polyethylene) — Irrigation Pipe & Hose manufacturers
18 approved suppliers
MaterialLDPE — Irrigation Pipe & Hose manufacturers
16 approved suppliers
CapabilityDrip Irrigation Pipe — Irrigation Pipe & Hose manufacturers
15 approved suppliers
CertificationISO 9001 certified Irrigation Pipe & Hose suppliers
15 approved suppliers
CertificationTSE certified Irrigation Pipe & Hose suppliers
14 approved suppliers
Featured Product Catalogs
Standard product types with enough suppliers in this category.
Featured Service Catalogs
Standard service types in this category that meet the supplier threshold.
Find the right supplier or list your company
Send RFQs as a buyer or publish your company profile in this category.