İstanbul — Industrial Adhesives Product (Industrial Adhesives)

Bostik Kimya Sanayi ve Ticaret A.Ş.

Bostik Eponal 342 epoxy repair mortar

Industrial Adhesives Product

EPONAL 342 is a solvent-free, two-component repair mortar used for crack bridging on reinforced-concrete floors, with high chemical and mechanical resistance. It is a solvent-free repair mortar with chemical and mechanical resistance. It is listed in the Bostik Türkiye catalogue in the floor-preparation / wall-and-floor range.

İstanbul

Bostik Kimya Sanayi ve Ticaret A.Ş.

Bostik FloPox fluid epoxy adhesive

Industrial Adhesives Product

Bostik FloPox is a solvent-free, fluid two-component epoxy adhesive used especially to provide adhesion between old and new concrete. It is used for bonding old and new concrete, protecting reinforcing steel against corrosion, bonding dissimilar materials such as concrete, stone and metal, and for all kinds of rebar dowelling and placing of anchorage elements. It contains no solvent, can be applied by brush or pouring, is watertight and can even adhere to damp surfaces. Compressive strength 80 N/mm² at 7 days; working time 60 minutes at +20°C. Supplied as a 7.5 kg tin set (A 5.0 kg / B 2.5 kg).

İstanbul

Bostik Kimya Sanayi ve Ticaret A.Ş.

Bostik GroPox epoxy anchoring mortar and adhesive

Industrial Adhesives Product

Bostik GroPox is an epoxy-resin-based, two-component anchoring, assembly and repair mortar. It is used for all kinds of rebar dowelling and placing of anchorage elements, repair and waterproofing of concrete cracks including sealing for crack injection, all kinds of structural concrete repair, and montage and bonding of metal components to concrete or steel. It contains no solvent, is watertight and bonds to concrete and steel. Compressive strength 75 N/mm² at 7 days; working time 40 minutes at +20°C. Supplied as a 5 kg tin set (A 3.75 kg / B 1.25 kg).

İstanbul

Türk Henkel Kimya San. ve Tic. A.Ş.

LOCTITE EA 9450 fast-cure epoxy adhesive

Industrial Adhesives Product

LOCTITE® EA 9450 is a transparent two-part epoxy adhesive suitable for a wide range of surfaces including metals, ceramics, glass and many plastics. It is typically used for component assembly, household appliances, electronics and fibre optics as well as general industrial repairs. It is ideal for filling gaps and, thanks to its non-sag character, for preventing flow on vertical surfaces. It cures quickly at room temperature to form slightly flexible, transparent bond lines. Mix ratio by volume 1:1; fixture time 13 minutes.

İstanbul · Istanbul Leather OSB

Türk Henkel Kimya San. ve Tic. A.Ş.

LOCTITE EA 9492 high-temperature epoxy adhesive

Industrial Adhesives Product

LOCTITE® EA 9492 is a white opaque (after mixing), general-purpose epoxy adhesive system for bonding and repairing an array of materials. It is typically used for potting or encapsulating boxes, parts and devices. It cures at room temperature to form a strong bond with good mechanical, electrical and impact-resistant properties. It also offers very low outgassing and resistance to thermal shock, solvents and high temperatures up to 180°C. Mix ratio by volume 2:1; pot life 15 minutes at 22°C for a 100 g mass.

İstanbul · Istanbul Leather OSB

Türk Henkel Kimya San. ve Tic. A.Ş.

LOCTITE EA 9466 structural epoxy adhesive

Industrial Adhesives Product

LOCTITE® EA 9466 is an off-white opaque/yellowish (after mixing), multipurpose epoxy adhesive system with high peel and shear strength. It cures at room temperature to form a tough bond line that acts as an excellent electrical insulator and is resistant to a wide range of chemicals and solvents. It is designed for applications that require high bond strength and an extended work life that makes it possible to adjust parts during assembly. Medium viscosity; mix ratio by volume 2:1, work life 60 minutes.

İstanbul · Istanbul Leather OSB

404 Kimya Sanayi ve Ticaret A.Ş.

404 Plastic Steel Rapid

Industrial Adhesives Product

404 Fast Plastic Steel Adhesive is a two-component, solvent-free, high-strength bonding and filling material developed for assembly, repair and filling work that needs a fast result. Its epoxy-based resin and amine-based hardener formula forms strong, lasting joints. Fast cure means the reaction starts in about 10–15 minutes at 23 °C. After full cure it shows high resistance to water, moisture and many chemicals. Gel time 10–15 minutes. Shore D 85 ±5. Service temperature −20 °C to 120 °C (intermittent 150 °C). Pack 16 g; 144 per carton, 130 cartons per pallet.

İstanbul

404 Kimya Sanayi ve Ticaret A.Ş.

404 Plastic Steel No.1

Industrial Adhesives Product

404 Plastic Steel Adhesive is a two-component, solvent-free, high-strength bonding and filling material used from electronic circuit assembly to connections of prefabricated concrete elements. Its formula of epoxy-based resin and amine-based hardener forms strong, lasting joints. Film-forming and gap-filling properties enable effective repair of cracks, voids and damaged surfaces. After full cure it shows high resistance to water, humidity, many solvents, alkalis and acids. Resin and hardener are mixed 100:65. At 23 °C touch-dry in about 2 hours, full cure in 24 hours. Gel time 120 minutes. Shore D 85 ±5. Service temperature −20 °C to 120 °C. Packs 16 g (9+7 g) and 41 g (24+17 g).

İstanbul

Alcon Endüstriyel Ürünler San. ve Tic. Ltd. Şti.

JAL-ALCON-S Epoxy Adhesive

Industrial Adhesives Product

JAL Alcon S is a fast-drying, general-purpose, epoxy-based metallic bonding and filling material. It sets in 5 minutes, bonds in 20 minutes and is ready to use after 1 hour. It is a fast grey plastic-steel adhesive gel. It provides very strong and practical bonding, does not lose volume after drying, and after drying is resistant to water, moisture and weak acids. Colour after mixing is grey. Heat resistance +120 °C (temporarily +160 °C). Pack examples: M-2310 30 g blister (12/box), M-2210 20 g box (24/box), M-2110 20 g blister (24/box).

İstanbul

Alcon Endüstriyel Ürünler San. ve Tic. Ltd. Şti.

Alcon Rapid Plastic Steel 5 Minutes Epoxy

Industrial Adhesives Product

Alcon Rapid Plastic Steel 5 Minutes is a fast-drying, general-purpose epoxy-based bonding and filling material. It hardens in 5 minutes, bonds in 20 minutes and is ready to use after 1 hour. It bonds fast, has very strong bonding and filling properties, and is resistant to atmospheric changes, weak acids and fuels. Colour is transparent. Heat resistance 120 °C (temporarily 150 °C). Packs: M-2205 16 g blister (12/box), M-2204 30 g blister (12/box).

İstanbul

Özcan Kimya

Hot-melt and Packaging Adhesives

Industrial Adhesives Product

The REPSOMELT range covers carton-ear, binding, label and filter hot-melts. Short, medium and long open-time grades are offered for packaging lines. POLYLAM polyurethane marine adhesive is also listed Orders and shipments are handled from the Beylikdüzü OSB (Istanbul) plant; technical sizes and materials are confirmed against the customer specification.

İstanbul · Beylikduzu Organized Industrial Zone

Beta Kimya

APEL Hotmelt Edgeband Glue

Industrial Adhesives Product

EVA hotmelt for edgebanding machines.

İstanbul · Birlik Organized Industrial Zone

Organik Kimya Sanayi ve Ticaret A.Ş.

Redispersible Polymer Powders (RDP)

Industrial Adhesives Product

Redispersible polymer powders for construction mortars, plasters and tile adhesives.

İstanbul