Cables & Connectors

EAE Elektrik A.Ş.

E-Line UK Pre-Galvanized Cable Tray

Pre-galvanized cable trays are manufactured in light/heavy duty types to TSE and ISO 10143. Standard length is 3 m. They are designed to carry cable installations in indoor areas of plants and buildings. The pre-galvanized cable support system is suitable for dry indoor environments. Tray sizes include 40, 50, 60 and 75 mm side heights and 300, 400, 500 and 600 mm widths.

İstanbul

Bimed Teknik Aletler San. ve Tic. A.Ş.

Nickel-Plated Brass Cable Gland

The standard nickel-plated brass gland is used in metal installations. Bimed has moulded plastics and turned metal parts for over 40 years. Glands protect cables against vibration and mechanical stress.

İstanbul · Beylikduzu Organized Industrial Zone

Bimed Teknik Aletler San. ve Tic. A.Ş.

Hazardous-Area Cable Gland

Hazardous-area glands seal cables where explosive gases, weather and corrosives are present and limit flame propagation. Bimed makes general-purpose and hazardous-area glands and conduit fittings. Products are certified to the relevant industry standards.

İstanbul · Beylikduzu Organized Industrial Zone

Bimed Teknik Aletler San. ve Tic. A.Ş.

Standard Plastic Cable Gland

Industrial cable glands provide sealed cable entry into electrical equipment against dust, moisture and chemicals, with strain relief. Bimed’s polyamide standard gland is made for general-purpose use. Annual output exceeds 60 million products.

İstanbul · Beylikduzu Organized Industrial Zone

HES Kablo

Copper communication cables

About states copper communication cable was added to the range after energy cables. The plants page lists a Communication Cable Production Plant. ISO, TSE, VDE and BASEC certificates are cited; modern test equipment is used at every production stage.

Kayseri̇ · Kayseri Organized Industrial Zone

HES Kablo

Fibre-optic cables

About lists fibre-optic cable production alongside copper communication cable. The plants page names a Fibre-Optic Cable Production Plant as a separate line. Integrated plants cover 250,000 m²; About also states products are developed to special customer specifications.

Kayseri̇ · Kayseri Organized Industrial Zone

HES Kablo

Energy cables

About states HES Kablo was founded in 1974 to manufacture energy cables and still lists energy cable in its range. The homepage shows an Energy Cables product card. Production is in 250,000 m² integrated plants (120,000 m² enclosed) to ISO 9001 by about 1,000 staff. TSE, VDE, BASEC and KEMA certificates are cited.

Kayseri̇ · Kayseri Organized Industrial Zone

Hasçelik Kablo

6–45 kV medium-voltage cables

Kayseri̇ · Kayseri Organized Industrial Zone

Hasçelik Kablo

0.6/1 kV copper power cables

The product menu lists 0.6-1kV Cables / With Copper Conductor. The catalog index and N2XH datasheet give copper conductor, XLPE insulation, 90 °C operating / 250 °C short-circuit temperature and TS HD 604/627. Cables are manufactured at the Kayseri OSB plant for power distribution and installation.

Kayseri̇ · Kayseri Organized Industrial Zone

Hasçelik Kablo

0.6/1 kV aluminium power cables

The product menu lists 0.6-1kV Cables / With Aluminum Conductor. About states the 2016 second factory manufactures Class 1 Solid Aluminum conductors (Shaper, round, or other) and Aluminum Tubes. Aluminium-conductor power cables are produced at Kayseri OSB in the same voltage class as the copper 0.6/1 kV series.

Kayseri̇ · Kayseri Organized Industrial Zone

Coreal Alüminyum Kablo

Bare Aluminium Conductors

Bare Aluminium Conductors covers AAC, AAAC, ACSR and similar overhead conductors. Coreal’s About text states the main industry is electrical conductor manufacturing. Conductors are used on transmission and distribution lines; EN, ASTM, BS and DIN appear in the quality menu.

Kayseri̇

Coreal Alüminyum Kablo

0.6–1 kV Aerial and Underground Power Cables

0.6–1 kV Aerial and Underground Power Cables are low-voltage aluminium-conductor energy cables for ABC overhead and underground use. Coreal lists them as a separate product group; PVC/XLPE types appear in the site catalogues.

Kayseri̇

Isoland Metal

Insulated Conductor Production

Flat and round copper and aluminium wires for transformer, winding and electric motor coils are insulated with kraft/crepe paper, Nomex-type aramid, Kapton-type polyimide film, glass fibre, enamel or polyester film. Coating thickness, overlap ratio and thermal class are set to the datasheet values. Every batch undergoes dimensional, resistance and breakdown voltage checks after production and is shipped with an EN 10204 3.1 certificate.

Ankara · Alcı Organized Industrial Zone

Isoland Metal

B2B Industrial Supply

Technical raw material supply—rod, bar and insulated conductors—is provided to energy transmission plants, power and distribution transformer manufacturers, wind turbine generators and electric motor factories. Stock management, batch traceability and planned shipment run from a single contact point; reels and packaging are prepared for the winding line. Standards compliance (IEC/EN/NEMA) is verified at quotation; batches ship with tests and EN 10204 3.1 certificates.

Ankara · Alcı Organized Industrial Zone

Bimed Teknik Aletler San. ve Tic. A.Ş.

Cable Gland Manufacturing

Bimed moulds plastics and turns metal for cable glands and conduit fittings. Published figures are 60 million products a year, 65 patents and a 28,000 m² plant. General-purpose and hazardous-area groups share the same engineering.

İstanbul · Beylikduzu Organized Industrial Zone

HES Kablo

Custom-specification product development

About states that besides products made to international and domestic standards, HES also develops products to special customer specifications and requests. Modern test equipment and control methods are used at every production stage. ISO 9001 and ISO 10002 customer-satisfaction requirements are taken into account.

Kayseri̇ · Kayseri Organized Industrial Zone

HES Kablo

Copper and aluminium rod production

The homepage states 55,000 t/year capacity for copper rod and for aluminium rod. Contact lists the copper and aluminium plant at OSB 20th Street No. 68, Melikgazi, Kayseri. About includes aluminium conductor in the product range.

Kayseri̇ · Kayseri Organized Industrial Zone

HES Kablo

Cable and conductor manufacturing

About states production started with energy cables in 1974 and expanded to copper communication, fibre, energy, aluminium conductor, enamelled winding wire, solar and weak-current cables. Plants total 250,000 m² (120,000 m² enclosed) with about 1,000 staff. Products follow international and domestic standards and special customer specifications.

Kayseri̇ · Kayseri Organized Industrial Zone

Hasçelik Kablo

Power cable manufacturing

Kayseri̇ · Kayseri Organized Industrial Zone

Hasçelik Kablo

OPGW and ACS wire production

Kayseri̇ · Kayseri Organized Industrial Zone

Hasçelik Kablo

Official R&D centre

About states the company owns official “R&D Research Center” approval from the Republic of Turkey Ministry of Science, Industry and Technology, complying with official regulations. News copy states the approval is the 2nd in Kayseri and 356th in Turkey. The quality system was established targeting full employee participation.

Kayseri̇ · Kayseri Organized Industrial Zone

Coreal Alüminyum Kablo

Cable Technical Support

Technical support is offered for product selection and standard matching. Quality and Integrated Management System pages state quality, environment and OHS commitments. Documentation is shared for conductor type (AAC/AAAC/ACSR) and 0.6–1 kV cable application.

Kayseri̇

Coreal Alüminyum Kablo

Conductor and Cable Production

The free-zone plant produces from wire rod through bare conductors and LV power cables. About states production since 1989 including the telecommunication industry. Capacity and export countries appear in catalogues; this service item describes the manufacturing capability.

Kayseri̇

Coreal Alüminyum Kablo

OEM Cable Manufacturing

As a group manufacturer Coreal produces aluminium conductors and cables to customer specification. Who we are states electrical conductor and cable manufacturing as the main industry. OEM orders set cross-section, insulation and standard (EN/ASTM) from the customer document.

Kayseri̇