Service description
More services from this company
Eray Sızdırmazlık Elemanları Makine Sanayi ve Ticaret Ltd. Şti.
Part Identification and Technical Support
Hydraulic Technical SupportAfter-sales technical support runs from selection of the correct sealing element through to installation. Dimensions are identified from a part number, a sample or a photograph, and the stock match or equivalent is confirmed before a reply is sent. Warehouse, technical service and dispatch operate at the same address on Uzay Çağı Avenue.
Ankara · OSTIM Organized Industrial Zone
Eray Sızdırmazlık Elemanları Makine Sanayi ve Ticaret Ltd. Şti.
Sealing Element Supply
General SealsSeals, O-rings, gaskets and repair kits from the domestic and foreign manufacturers the company represents are stocked in the 1,200 m² warehouse in Ostim. Products from NOK, Simrit, Corteco, Hallite, Merkel, Gapi and domestic makers are shipped in original, OEM and domestic grades inside Turkey and abroad. A tracking number is shared after the order is confirmed.
Ankara · OSTIM Organized Industrial Zone
Related services
Artı Kauçuk
Custom Seal Engineering
Custom Seal EngineeringEngineering covers the design, development and production of high-performance sealing products. O-rings can be made in custom sizes beyond the standard range on customer request. NBR, EPDM, Viton and silicone are separated by temperature: NBR up to +100 °C, EPDM from -30 °C to +140 °C, Viton up to +260 °C, and silicone from -50 °C to +220 °C. The work prepares sealing solutions for automotive, defense, aerospace, hydraulic and pneumatic applications.
Bursa
Can Sızdırmazlık Elemanları San. ve Tic. Ltd. Şti.
Custom Sealing Design
Custom Seal EngineeringCan Sızdırmazlık produces solutions for sealing-element needs with 26 years of industry experience and designs based on advanced technology. Best O-ring performance requires correct sizing, the right material and the correct quality of the metal surfaces. Dynamic applications need a better surface than static duty: Rmax ≤ 4 μm on a dynamic cylinder, ≤ 2 μm on the rod, and ≤ 6–1.2 μm on the groove base; on a static sealing face Rmax ≤ 10 μm and on the groove base ≤ 25 μm. For static pressure, tolerances must be chosen so that an extrusion gap does not open.
İstanbul · Ikitelli Organized Industrial Zone
Gökhan Kauçuk
SealXpert Custom Production
Custom Seal EngineeringSealXpert is Gökhan Kauçuk’s custom sealing production system, built on its CNC machining setup. O-rings, seals, bearing tape and special gaskets are made from the drawing without waiting for a mould. The job starts from a drawing, sample or dimensions supplied by the customer. The part is shaped in CAM software and machined on a CNC lathe, then delivered after dimensional and sealing checks. The product groups cover hydraulic and pneumatic piston and rod seals, O-rings, X-rings, back-up rings, bearing tapes and bonded seals. Listed materials include PTFE, polyurethane, NBR and FKM. The products page states custom production in PU, PTFE and elastomer up to 1700 mm outside diameter.
Ankara · Ivedik Organized Industrial Zone
Gökhan Kauçuk
Small-Batch and Sample Production
Custom Seal EngineeringSmall-batch production is listed on the SealXpert page together with fast production and flexible production in different materials. For urgent needs and special sizes, the job moves from a drawing, sample or dimensions to a CNC lathe without waiting for a mould. The back-up ring page also states small-quantity sample production in different sections and materials. Parts that can be made include hydraulic and pneumatic piston and rod seals, O-rings, X-rings, back-up rings, bearing tapes and bonded seals. PTFE, polyurethane, NBR and FKM are among the materials used for this flexible production. Parts are delivered after dimensional and sealing checks.
Ankara · Ivedik Organized Industrial Zone