Emek Lastik

Regenerated-Rubber Production

Rubber Molding Service

Regenerated-Rubber Production.

Samsun · Samsun Merkez Organized Industrial Zone

Emek Lastik

Rubber Footwear Manufacturing

Plastics & Rubber Service

Rubber Footwear Manufacturing.

Samsun · Samsun Merkez Organized Industrial Zone

Batı Conta

Profile Extrusion

Custom Silicone Extrusion

Need a sealing wick with a non-standard cross-section? We tool to your drawing and extrude silicone or rubber profiles to the metreage you specify. On Batı Conta’s extrusion line: e, P, D, U and custom geometries for oven doors, sterilizers and façade details, typically -60°C to +250°C. After sample approval we run production lengths to order.

İstanbul

Ortaklar Kauçuk Sanayi ve Ticaret Ltd. Şti.

Custom Profile and Seal Production

Custom Silicone Extrusion

Silicone profiles are produced for -60°C to +250°C, in a formulation resistant to UV, ozone and moisture. D, E, P, U, H, L and T types, plus round, flat and special sections, are made to the required size for lids, gaskets, edges, doors and glazing. Steel-reinforced door and trunk seals are based on rubber, EPDM and silicone and are produced in project-specific size and form for water, dust, air and noise sealing. U-edge trim is also made from rubber compound in different profiles and sizes.

İzmir · Kemalpasa Organized Industrial Zone

Teksen Kauçuk

Rubber and Silicone Extrusion Production

Custom Silicone Extrusion

Rubber extrusion is used to design and manufacture products such as profiles, cord o-rings, strips and hoses. After material and machine preparation, the rubber takes the desired shape under high heat and pressure and is stabilised by cooling. Products are made to the required dimensions and properties using custom dies.

İstanbul

Gentez Elastomer Kauçuk Sanayi ve Ticaret Ltd. Şti.

Custom Section Silicone and Rubber Extrusion

Custom Silicone Extrusion

Extruded products with custom cross-sections are produced to technical drawing or sample. The section is defined by the application's sealing requirement, contact surface, compression ratio and mounting method. Section stability, surface finish and dimensional repeatability are monitored throughout production. Products are supplied by the metre or cut to length, with coiling and packaging planned to prevent deformation in transit.

İstanbul