Ekos / A.T.S. Ateş Tuğla

Clinker and Refractory Manufacturing

Construction Materials Service

Firebrick, clinker, terracotta panel, cotto floor and kerb production at Bozüyük OSB. With the new plant in 2015 and the end of Istanbul production in 2016, annual clinker capacity of 1,000,000 m² is under one roof.

Bi̇leci̇k · Bilecik Bozuyuk Organized Industrial Zone

Ekos / A.T.S. Ateş Tuğla

Facade Cladding Systems

Construction Materials Service

EKOS EKOTON, EKOTERM and EKOPANEL facade systems have been offered since 2009; facade cladding is done with clinker brick and terracotta panel. Clay panels produced at Bozüyük OSB 13th Street No:10/12 comply with TS EN 1304.

Bi̇leci̇k · Bilecik Bozuyuk Organized Industrial Zone

Tepe Betopan Yapı Malzemeleri San. Tic. A.Ş.

Product and Application Technical Support

Construction Materials Service

Tepe Betopan provides application and product selection support via [email protected]. The document centre publishes product sheets, catalogues and technical documents; installation videos (e.g. riveted fixing) cover correct dry cutting, stacking and handling. Product pages state application limits such as minimum exterior thickness outside prefab use, production direction and sizing rules; after-sales guidance is routed through the dealer network.

Ankara

Tepe Betopan Yapı Malzemeleri San. Tic. A.Ş.

Custom-Size Board Cutting and Dimensioning

Construction Materials Service

Cement-bonded particle and fiber cement boards in standard production sizes can be cut in width and length for custom dimensions; non-standard thicknesses and formats are arranged with the factory. For Tepe Unique Pro® facade supply, factory-cut sized panels are delivered rather than full sheets; product documents require observing production direction during design/installation and mandate dry cutting. Boards cut with wet methods fall outside warranty.

Ankara

Tepe Betopan Yapı Malzemeleri San. Tic. A.Ş.

FireEx® Fire-Resistant Ventilated Facade System

Construction Materials Service

FireEx® is a ventilated facade system with A2 reaction-to-fire classification; the system is non-combustible. It has five main components: load-bearing wall, anchorage/profile substructure, mineral wool insulation, minimum 20 mm ventilation cavity and cladding board. By board type it is offered as FireEx Basic (cement-bonded / Betopanplus group), FireEx Ultra (tepePAN group) and FireEx Unique (Tepe Unique Pro group); Basic/Ultra use galvanized L-J-M profiles, Unique uses aluminium L-T profiles.

Ankara

Asyol Asfalt Taahhüt Ticaret Sanayi A.Ş.

Asphaltic Concrete Paving and Compaction

Construction Materials Service

The asphaltic concrete mixture is hauled to the laying site by dump trucks. It is paved by electronically sensored pavers to the specified grades and compacted by pneumatic-tyred and tandem rollers. Where load or dimension limits prevent standard plant, mini pavers or vibrating screeds are used for laying and mini rollers and plate compactors for compaction. Aggregate and bitumen specification, mix gradation and bitumen content, mixture temperature, base resistance and paving/compaction compliance are checked at every stage.

Ankara