Service description
Quality and certifications
Certifications defined on the company profile (read-only)
- ISO 9001
- CE Marking
More services from this company
Austrotherm Yalıtım Malzemeleri San. ve Tic. Ltd. Şti.
Facade ETICS Application
Thermal Insulation SystemsFor facade ETICS, the wall is cleaned of dust, dirt and moisture and cracks are repaired. EPS boards are set into a starter profile and bonded with dabs plus a perimeter bead of adhesive. After the adhesive has cured, boards are mechanically fixed with six plastic anchors per square metre; corner, drip, sill and movement profiles are fitted before render. Two coats of thin render with alkali-resistant mesh are applied, then mineral render and paint or ready-coloured acrylic/silicone decorative render.
Kocaeli · Dilovasi Organized Industrial Zone
Austrotherm Yalıtım Malzemeleri San. ve Tic. Ltd. Şti.
Basement Wall Insulation
Thermal Insulation SystemsThe basement wall is excavated to the footing and two coats of liquid waterproofing membrane are applied. 25 cm Austrotherm EPS with 100 kPa compressive strength and 0.035 W/mK thermal conductivity is bonded with cement adhesive. Two coats of mesh-reinforced thin render and two further membrane coats follow. A drainage board is installed with dimples toward the insulation, then backfill. 20 kg/m³ EPS was selected against the calculated lateral soil stress.
Kocaeli · Dilovasi Organized Industrial Zone
Related services
Fixa Yapı Kimyasalları
Product Selection and Application Technical Support
Construction Materials ServiceFİXA treats dealers as long-term partners. Experienced sales teams and technical support units guide customers on product selection and correct application. Application guidance and after-sales technical information cover eleven main product groups: waterproofing, sealants, repair-reinforcement, floors, thermal insulation, concrete admixtures, mold release agents, cement plasters, ceramic adhesives, grouts and technical adhesives.
İstanbul · Beylikduzu Organized Industrial Zone
Arsan Kauçuk Plastik Makine San. Tic. A.Ş.
Expansion Joint Installation and Replacement
Construction Materials ServiceWith SEM expansion joints ARSAN provides solutions for environmental effects, live loads, and physical changes after creep and shrinkage in structures, with standard and seismic types for many gap widths. Installation and replacement of SEM joints is simpler than other types; the work is carried out under the supervision of expert engineers and is covered by the Arsan warranty based on the supervisor's report.
Sakarya · Ferizli Organized Industrial Zone
Yente Makine A.Ş.
Reinforced Earth Wall (MSE Walls)
Construction Materials ServiceYente designs, manufactures and installs reinforced earth (MSE) wall solutions tailored to each project for highways, railways, bridges, urban development, water management and industrial facilities. Combining compacted fill, tensile reinforcement layers and a modular facing system delivers flexibility, economy and seismic resilience compared with rigid concrete walls.
Ankara · OSTIM Organized Industrial Zone
Yente Makine A.Ş.
Precast Facade (Precast Concrete Panel) Production and Installation
Construction Materials ServiceUnderpass cladding with precast facade panels made of fibre-reinforced concrete. Panels are produced in a controlled factory environment, shipped to site and installed on the underpass facade. Plain minimalist, textured geometric and insulated panels providing sound and heat insulation are offered; Menemen and Aliağa underpasses are among the decorative precast cladding references.
Ankara · OSTIM Organized Industrial Zone