Service description

ACL Mekanik calculates the air before selecting a fan for factories, warehouses and enclosed car parks. Volume, heat load, pollutant sources and the existing system are inspected on site. Air change rates, extraction and supply points, duct diameters and pressure losses are calculated, and a layout plan and equipment list specific to the space are prepared. The scope covers general industrial ventilation, enclosed car park jet fan systems, smoke extraction and pressurisation, source-capture extraction lines, and fresh-air and exhaust balance. The engineered system is manufactured in the company’s own facility and installed on site.

Quality and certifications

Certifications defined on the company profile (read-only)

Full company profile
  • CE Marking
  • ATEX

More services from this company

Custom-Engineered Fan Manufacturing — ACL Mekanik

ACL Mekanik

Custom-Engineered Fan Manufacturing

Custom Machine Building

ACL Mekanik selects the fan from the facility’s site conditions rather than from catalogue values alone. Ductwork resistance, ambient temperature, airborne particles and installation space directly affect fan selection. The required airflow and pressure are determined on site; impeller type, casing structure, material and motor are designed to these values and the fan is manufactured, balanced and inspected in the company’s own facility before shipment. The scope includes high-temperature resistant casing and impeller, blade types for abrasive and sticky dust, ATEX compliant construction for explosive atmospheres, custom casing dimensions for tight spaces and variable-speed operation with a frequency inverter. Design values of each custom fan are kept on record.

Konya

Filtration System Design — ACL Mekanik

ACL Mekanik

Filtration System Design

Filtration System Design and Engineering

ACL Mekanik designs the dust collection system by assessing extraction-point layout, duct velocity, pre-separator choice and filter surface area together. Dust quantity, particle size, temperature and humidity in the process are reviewed, and the cyclone, multi-cyclone and dust collector are designed as one system. After the pre-separator, filter type, surface area and cleaning method are set, a fan suited to the total system resistance is selected and the line is balanced. The scope includes cyclone and multi-cyclone pre-separators, cartridge and bag dust collectors, automatic jet pulse cleaning, dust discharge solutions and safeguards for explosive dusts.

Konya

Related services

Compressed Air Energy-Efficiency Engineering — Alfa Basınçlı Hava Sistemleri ve Mühendislik San. Tic. Ltd. Şti.

Alfa Basınçlı Hava Sistemleri ve Mühendislik San. Tic. Ltd. Şti.

Compressed Air Energy-Efficiency Engineering

Engineering Services Service

ALFA Compressed Air offers engineering for the efficient use of compressed air, described as the most expensive form of energy. Using compressor air for cleaning, blowing and drying is treated as waste; that air is reserved for force applications such as presses, actuators and pneumatic pistons. In the company’s comparison, 2400 L/min at 6–7 bar from a compressor draws 15 kWh, while ALFA AIRSAFE producing the same flow at 0.2 bar draws 1.4 kWh. The speed-controlled motor is set between 0.2 and 1.4 kWh. The approach, linked to Kaizen, is to take unnecessary compressed-air use out of cleaning tasks.

İstanbul

Boiler Engineering — General Kazan

General Kazan

Boiler Engineering

Engineering Services Service

On request, General Kazan visits the plant and identifies the fuel that is lowest cost and easiest to obtain or transport in that region. Options reviewed are gas fuels such as natural gas, LNG and LPG, liquid fuels such as diesel, light oil and heavy oil, and solid fuels such as coal, pellet, olive pomace and hazelnut shell. Thermal capacity and temperature of the production site are set, and a water analysis is arranged for local water quality. The unit is located to occupational-safety criteria and designed for the workplace. The steam, hot water, superheated water or thermal oil boiler type is then released to manufacture.

Aksaray

Turnkey System Installation — İtimat Kazan ve Makine San. Tic. Ltd. Şti.

İtimat Kazan ve Makine San. Tic. Ltd. Şti.

Turnkey System Installation

Engineering Services Service

İtimat Kazan combines compatible products into packaged systems. Projects are generally turnkey: the systems are built under the company's own supervision and commissioned. A steam boiler or generator, economizer, water softener, feedwater pump, condensate tank and control panel are completed together. Engineering follows capacity, fuel type and site conditions. For newly built factories the company describes both the supply of equipment and the installation of these systems as part of its scope.

İstanbul · Ikitelli Organized Industrial Zone

Project Implementation — Erensan Isı Tekniği Sanayi ve Ticaret A.Ş.

Erensan Isı Tekniği Sanayi ve Ticaret A.Ş.

Project Implementation

Engineering Services Service

On Erensan project work, products sold with installation are covered by a commissioning and start-up commitment. Engineers survey the boiler room during the sale. After the survey they select the most effective product, complete mechanical and electrical installation, and hand the plant over running. Where installation is not included, supervision supports the customer’s mechanical and electrical fit-out. Automation design is assessed at the sales stage. Technical training is given to the customer during commissioning and first start-up.

İstanbul

Ready to Find Your Next Manufacturing Partner?

Explore Turkish manufacturers and industrial suppliers on TurkIndustry. Discover potential sourcing partners, submit RFQs and compare quotations — all from one platform.

Start Sourcing Today →