Product description

PU belt, modular belt, curved (45, 60, 90 and 180°), roller and O-ring, steel belt, screw (auger), vibratory and wire mesh belt conveyors are built. Frames are made of AISI 304 or ST37 depending on the application; Habasit belts are used on PU conveyors. Steel belt conveyors use a V-guide system to prevent belt slip, and screw conveyors get a high-torque drive selected by product capacity.

More from this company

Related products

Vertical Bucket Elevator — Cnrmak

Cnrmak

Vertical Bucket Elevator

Conveyors Product

The belt bucket elevator is a conveying system used to lift bulk and granular products vertically, at high capacity and continuously. Buckets mounted at intervals on an endless belt pick up materials such as grain, flour, granules, feed, cement and sand at the bottom and discharge them at the top. The compact vertical layout is used where material must be raised to a high level. Continuous feed supports high-tonnage transfer, lifting in a minimum floor area, and stable running at high speed with low noise and low vibration. Plastic, stainless or steel buckets are offered, with a painted sheet or AISI 304/316 stainless steel body.

Konya

Flat PVC Conveyor — Cnrmak

Cnrmak

Flat PVC Conveyor

Conveyors Product

The flat PVC conveyor is a belt used to move bulk or granular products horizontally from one point to another. It is described as a fast and economical solution, generally for short distances and lower-capacity conveying. Length and width can be customized. The belt is food-grade PVC. Cleat and sidewall height are set to the requirement. The drive is a worm-gear reducer. CNRMAK states that all conveying systems can be customized to the application.

Konya

Z Elevator — Cnrmak

Cnrmak

Z Elevator

Conveyors Product

The Z elevator is used to move agricultural products such as pulses, seed and wheat, and fragile industrial raw materials, within a process or during packaging. It is chosen because it does not damage the product in transit. It can convey on horizontal and vertical axes at the same time, and those lengths are built to the required dimensions. Because it rises at 90 degrees on the vertical axis it is called a vertical Z elevator and is designed for narrow working areas. The buckets move independently of each other, which reduces spillage and raises capacity. The wide bucket surface gives better results with large granules. A 370 mm bucket carries 7–9 m³/h and a 420 mm bucket carries 9–11 m³/h. A high-strength pin-projection chain, carbon steel, galvanized or chrome frame, and a worm-gear reducer are used.

Konya

Conveyor Roller — AKM Konveyör Makina İnşaat Sanayi ve Ticaret Limited Şirketi

AKM Konveyör Makina İnşaat Sanayi ve Ticaret Limited Şirketi

Conveyor Roller

Conveyors Product

A conveyor roller is a moving part of the conveyor that supports and guides the belt. AKM manufactures steel, stainless steel, aluminium and polymer rollers according to carrying capacity, belt width, working environment and conveying distance. Rubber, ceramic or polyurethane coatings can be applied against wear and corrosion. After production, rotation accuracy, durability and load capacity are tested. The rollers are used on mining, logistics, food, cement and agricultural lines.

Ankara

Ready to Find Your Next Manufacturing Partner?

Explore Turkish manufacturers and industrial suppliers on TurkIndustry. Discover potential sourcing partners, submit RFQs and compare quotations — all from one platform.

Start Sourcing Today →