Üçge DRS
Manufacturer of robotic, automated, semi-automated and manual warehouse racking systems; based in Bursa Işıktepe OSB.
About
Production profile
Company type
Activity types
Production capabilities
Materials worked
Manufacturing processes
Certifications
Export profile
Industries served
Activity categories
Map
Factory gallery
Products
AS/RS Pallet Automated Warehouse Racking
In AS/RS pallet automated racking, stacker-crane robots serve high-bay warehouses with very high in/out rates; storage heights can reach 40 metres. Automated storage and retrieval speeds can reach about 150 m/min, with no operators needed in the storage area. The whole warehouse runs under a single WMS; robots store and retrieve in parallel according to software commands. Warehouse design and robot speed are adapted to required load capacity and pallet throughput. ÜÇGE's patented PAŞA pallet AS/RS solution is offered in this line.
Cantilever Warehouse Racking Systems
Cantilever racking is used to store pipes, profiles, timber, plastics and similar long goods. It allows items of different lengths to be stored side by side without gaps, and can be extended with additional elements. Systems can be single- or double-sided; adjustable arms create open racking at the required load and height. Arm spacing is changed to match weight and volume. Versions with or without stops are available; the structure comprises upright columns, arms and rear bracing. Long, bulky and heavy materials can be stacked without pallets; produced at ÜÇGE DRS's integrated Bursa plant.
Back-to-Back Warehouse Racking Systems
Back-to-back warehouse racking provides direct pallet access and is configured on the FIFO (first in, first out) principle as the most economical pallet racking system. Bay sizes are set after feasibility based on pallet dimensions, loaded pallet height and maximum pallet weight, with aisles sized for the stacking equipment. Uprights are made from pre-galvanized sheet up to 2.5 mm thick; beams clip onto uprights and are secured with safety pins. Beam levels can be adjusted later; accessories such as upright protectors, wire mesh backs and stop beams can be added.
Services
Autopal Shuttle Warehouse Racking Systems
Autopal shuttle racking is a semi-automated system where same-size pallets are stored deep in lanes and loaded/unloaded by a remote-controlled shuttle. The electromechanical shuttle uses a lithium-ion battery and laser readers, with 1,500 kg capacity. Throughput of about 40–50 pallets per hour in/out can be targeted; FIFO and LIFO modes are supported. It can operate in cold rooms down to -30 °C and is CE certified (-25 °C per IEC/EN 60068-2-1). One remote can run four shuttles; the battery reaches 100% charge in about five hours. WMS-compatible and ready as a step toward full automation.
Mobipal Mobile Warehouse Racking Systems
Mobipal mobile racking mounts racks on electrically driven mobile bases that travel on floor rails, opening one or more access aisles for compact storage. It reclaims aisle space from back-to-back or narrow-aisle layouts to raise capacity. Modern PLC control includes emergency stops, photoelectric access barriers, manual release and proximity sensors for safe operation. In frozen storage, denser storage reduces the air volume that must be cooled and cuts energy costs. The modular concept is configured for back-to-back or narrow-aisle applications.
ODİS Automatic Vertical Lift Storage System
ODİS automatic vertical lift storage delivers high capacity on a small footprint—for example about 840 m² of equivalent vertical storage on a 14 m² base. A typical module with 7–9 m ceiling height on roughly 15 m² can match about 300 m² of static racking. Goods sit on trays in two storage columns served by a central lift and are presented to the operator at the pick/put station on demand. Integration with MES/ERP and WMS supports weight measurement, dwell-time tracking by expiry date and physical-vs-digital stock counts. Benefits include up to 90% floor-space savings, SKU-based picking and safer access under occupational safety rules.