Reta Mühendislik Depo Raf Sistemleri San. ve Tic. A.Ş.
Manisa · Yunusemre
Reta Mühendislik Depo Raf Sistemleri San. ve Tic. A.Ş.
Founded in 1979, RETA Engineering designs, manufactures and installs warehouse racking systems at its 20,000 m² plant in Manisa Muradiye OSB.
About
Production profile
Company type
Activity types
Production capabilities
Materials worked
Manufacturing processes
Technical standards
Certifications
Export profile
Industries served
Activity categories
Map
Location is approximate, based on the address. · © OpenStreetMap
Factory gallery
Products
Drive-In Racking System
Drive-in racking is a high-density storage solution for large quantities of products that are the same in type and characteristics. The forklift enters the lane inside the rack block to place and retrieve pallets, so fewer aisles are needed and more pallets fit in the same area. The system is engineered as a channel structure suited to LIFO, with pallet support rails and guide rails. It is used in food, beverage, chemical, logistics, production and cold-storage warehouses.
Cantilever Racking System
Cantilever racking is used especially for stacking long goods. Uprights and arms selected by load allow a wide range of products to be stored. The structure consists of vertical columns and cantilever arms fixed to them. Long materials such as pipe, profile, panel, timber, chipboard and wooden sheet are placed directly on the arms with no obstruction in front of the rack. The system can be single-sided or double-sided; arm length, height and load capacity are planned to product length and weight.
Back-to-Back Racking System
Back-to-back racking is the most widely used storage system for heavy goods stacked on pallets, crates or baskets, with a broad range of use. The system applies the FIFO (first in, first out) principle and suits storage of a large variety and quantity of products. Each pallet is stored in an independent bay. The modular structure of uprights, beams, connectors and protective accessories is engineered to pallet size, weight and forklift type. Rack height, bay clearance and number of levels change with the product.
Services
Racking System Manufacturing
Racking systems are formed on roll-form lines in the 20,000 m² enclosed plant in Manisa. Robotic welding, a fully automatic power & free paint shop and integrated quality control are part of manufacture aimed at strength and long service life. ISO 9001 covers design, sales, production, installation and after-sales service. About 45% of production is exported to 41 countries.
Racking System Installation
Since its founding the company has carried out design, manufacturing and installation together with its engineering staff. The ISO 9001 certificate also covers installation and after-sales service. Before installation, site conditions, aisle layout, load capacity and operating flow are assessed. On back-to-back, drive-in and cantilever projects, installation is completed under the same responsibility as engineering and manufacture.
Racking System Engineering
The engineering team designs storage solutions for each site in line with European Racking Federation (FEM) guidelines and EN standards. Planning is based on EN 15512 structural design of adjustable pallet racking, EN 15620 tolerances and clearances, EN 1993-1-3 cold-formed steel, EN 16681 seismic design, EN 15629 specifications and EN 15635 application and maintenance. Systems compliant with EN 15512 and tested at university are engineered to site dimensions and the product to be stored.