Oringciler
Production of O-rings, gaskets and sealing elements in natural and synthetic rubber: NBR, EPDM, VMQ, NR, SBR, CR, CSM and FKM.
About
Production profile
Company type
Activity types
Production capabilities
Materials worked
Manufacturing processes
Certifications
Export profile
Industries served
Activity categories
Map
Factory gallery
Products
Rubber Gaskets
Rubber gaskets are sealing products made from natural and synthetic rubbers. Compounds include nitrile, EPDM, silicone (MQ, VMQ, PVMQ), natural rubber (NR), SBR, chloroprene (CR), CSM and fluorocarbon (FKM). EPDM is used between -40 °C and 150 °C; it resists phosphate-ester fluids, glycol-based brake fluids, steam, ozone and weathering, and is not suitable for fuels or petroleum oils. Gaskets are processed on the rubber injection and cryogenic deflashing line.
Oil Seal Types
Oil-seal types are rubber sealing elements offered for shaft and oil sealing. Silicone rubber (MQ, VMQ, PVMQ) is used from -60 °C to 200 °C and intermittently up to 250 °C; its main use is crankshaft seals. Fluorocarbon rubber (FKM) works from -30 °C to 220 °C, resists most greases, oils, fuels, solvents and chemicals, and is used in crankshaft seals at high temperature and high speed. Polyacrylic rubber (ACM) is cited especially for gearbox seals, generally up to 150 °C.
O-Ring Types
O-ring types are sealing elements produced from natural and synthetic rubber compounds: NBR, EPDM, VMQ, NR, SBR, CR, CSM and FKM. Production uses rubber injection, cryogenic deflashing and quality-control systems. Parts are aimed at automotive supply, the machinery industry, sanitary installations, natural-gas systems and other sectors. For specific sizes the firm also provides mould making and product-supply support.
Services
Rubber Injection and Cryogenic Deflashing
Rubber injection, cryogenic deflashing and quality-control systems are used together in production. Cryogenic deflashing is for removing flash after injection; quality-control tests aim at a high standard on O-rings, gaskets and other sealing elements. The line runs parts for automotive supply, the machinery industry, sanitary installations and natural-gas systems. Compounds cover natural and synthetic rubbers.
Rubber Mould Making
Moulds are made to meet requests for specific special parts. The mould is prepared to the customer's size for sealing parts such as O-rings, rubber gaskets, oil seals, diaphragms and check-valve assemblies. After the mould, the part is produced by rubber injection from NBR, EPDM, VMQ, NR, SBR, CR, CSM and FKM compounds. Cryogenic deflashing and quality control continue that special-part line.
Special Product Supply
For specific special-part requests the firm provides product-supply support alongside mould making. Sealing products such as O-rings, rubber gaskets, diaphragms, oil seals and check-valve assemblies are supplied in natural and synthetic rubbers for domestic and international requirements. Supply is offered together with the firm's rubber injection and cryogenic deflashing capacity. NBR, EPDM, VMQ, NR, SBR, CR, CSM and FKM compounds are among the types used for these requests.