Onursan Vana Tekstil ve Makine San. Tic. Ltd. Şti.
Tekirdağ · Ergene
Onursan Vana Tekstil ve Makine San. Tic. Ltd. Şti.
A company manufacturing stainless pneumatic valves since 1997, open to innovation and development.
About
Production profile
Company type
Activity types
Production capabilities
Materials worked
Certifications
Activity categories
Map
Location is approximate, based on the address. · © OpenStreetMap
Factory gallery
Products
PY 45 Series Pneumatic Valve DN15-50
PY45 series valves act as flow shut-off valves for water, air, oil and non-flammable gases, in normally open, normally closed or double-acting configurations. The AISI 316 body is investment cast from DN15 to DN50, the piston housing is glass-fibre filled Nylon 66, and the seal is carbon-filled PTFE. Working temperature is -10°C to +180°C with 4-6 bar pilot pressure; threaded, socket-weld and flanged connections are available.
PY 45 Series Flanged Pneumatic Valve DN15-50 PN40
PY 45 series flanged valves are used for steam, water, air and oils at PN40 nominal pressure, with a working temperature of -10°C to +180°C and an actuator temperature of -10°C to +100°C. The lower body is stainless 316, the piston housing is glass-fibre filled Nylon 66 and the seal is carbon-filled PTFE. The PTFE and viton packing is self-adjusting; pilot pressure is 4-6 bar with 50, 80 and 100 mm piston options.
PY 90 Series Pneumatic Valve DN15-50 PN40
PY90 series valves serve as flow shut-off valves for steam, water, air and oils at a nominal pressure of PN40. The lower body from DN15 to DN50 is stainless 316, the piston housing is glass-fibre filled Nylon 66, and the seal is carbon-filled PTFE. Working temperature is -10°C to +180°C with 4-6 bar pilot pressure and an open/closed position indicator; socket-weld and flanged versions are produced.
Services
Custom Bottom Valve Manufacturing
Within its custom valve range, Onursan Vana manufactures stainless bottom valves with flanged connections and pneumatic actuators. Production takes place on a production and assembly line with a monthly capacity of 5,000 stainless pneumatic valves, in a facility with 3,000 m² of covered area. Size and connection details are defined according to customer needs.
Custom Stepped Filling Valve Manufacturing
The stepped filling valve, part of Onursan Vana's custom valve range, is produced with a stainless body and pneumatic actuator for stepped filling operations. The valves are manufactured and assembled at the Ergene facility of the company, which has produced stainless pneumatic valves since 1997. Custom sizes and connections are produced on request.
Custom Group Valves
Within its custom valve range, Onursan Vana produces group valves in which several pneumatic valves are combined on a common stainless manifold. Production and assembly are carried out by experienced technical staff at the 3,000 m² covered facility in Velimeşe OSB. The company has a monthly capacity of 5,000 stainless pneumatic valves.