Odin Safety
Düzce · Merkez
Odin Safety
Manufacturer of horizontal and vertical lifeline systems and anchors for working at height.
About
Production profile
Company type
Activity types
Production capabilities
Materials worked
Manufacturing processes
Certifications
Export profile
Industries served
Activity categories
Map
Location is approximate, based on the address. · © OpenStreetMap
Factory gallery
Products
OD-FORZA Mobile Wheeled Anchor System
OD-FORZA is a fully manual hydraulic mobile wheeled anchor system for two simultaneous users. The anchor head has a maximum 150 kg capacity with two independent anchor points. Forklift pockets and a tow hitch aid manoeuvring; setup is quick. It creates safe attachment points in indoor and outdoor industrial areas, on vehicles, and in greenhouse, oil, mining and aviation workplaces. Built from ST37 steel. Certified to EN 795:2012 Type B / CEN/TS 16415 Type B and PPE Regulation 2016/425.
OD-MAXILINE Horizontal Lifeline
OD-MAXILINE is a horizontal lifeline designed so connected workers remain continuously protected along the line. It combines aluminium and stainless-steel components with a maximum span of 25 m between anchors and is certified for up to six simultaneous users. A spring indicator eases tension checks; the OD-GLD trolley allows uninterrupted travel without rope abrasion. Manufactured from 2 m upward to required lengths. Certified to EN 795:2012 Type C and CEN/TS 16415:2013 Type C. Suitable for roofs, steel structures, crane runways and vehicle tops.
OD-VERTILINE Vertical Lifeline
OD-VERTILINE is a vertical lifeline with aluminium and stainless-steel components, permanently fixed on fixed ladders, tower tops, masts, lighting towers, chimneys and similar structures for safe access. Special fittings reduce wind effect on runs of 30 m and above. A spring indicator supports tension checks; the system is certified for three simultaneous users. The OD-VLG rope grab enables continuous travel. Certified to EN 353-1:2014+A1:2017. Non-sparking construction suits areas with explosion risk.
Services
Periodic Maintenance and Inspection
Regulations require annual periodic maintenance and inspection of work-at-height systems. Periodic care of OD-MAXILINE horizontal lifelines, OD-VERTILINE vertical lifelines and other Odin Safety anchors is performed by specialist teams. After inspection a report records product type, model, serial number, manufacture and use dates, next inspection date and inspector identity; copies stay with the customer and Odin Safety and are shared by email. Repair and maintenance follow authorised instructions only.
Lifeline Installation and Assembly
Installation of Odin Safety horizontal lifelines, vertical lifelines and anchors is performed by specialists certified for work at height with IRATA L1/L2/L3 and/or SPRAT L1/L2/L3 training. The lifeline is designed and quoted first; after approval, assembly follows site conditions. User training is provided free of charge at handover and recorded. Solutions support mandatory fall-protection installations under Türkiye’s construction OHS regulation Annex-5.
Work-at-Height and Product Use Training
Odin Safety provides work-at-height training across Türkiye and internationally through its service network. After installation, user training is delivered free of charge, recorded and included in handover. Basic pre-use checks that users must perform are covered in product-use training. Project-specific engineering and site-adapted lifeline design support the training process, with practice shared for iron and steel, energy, construction and telecommunications workplaces.