Ege Conta Keçe ve Oring Sanayii
İstanbul · Beylikdüzü
Ege Conta Keçe ve Oring Sanayii
Manufacturer of hydraulic and pneumatic sealing elements, O-rings, swivel-head gaskets and PTFE ball valve seats.
About
Production profile
Company type
Activity types
Production capabilities
Materials worked
Industries served
Activity categories
Map
Location is approximate, based on the address. · © OpenStreetMap
Factory gallery
Products
Hydraulic and Pneumatic Sealing Elements
Ege Conta's W-coded seal range covers hydraulic rod seals and U-cups (W001 packing, W018 compact set, W022, W031, W033, W035, W037, W038 etc.), hydraulic piston seals (W003 piston packing, W015, W017), piston-rod seals and WX-Ring, pneumatic piston and rod seals (W025, W030, W050, W054–W062) and wiper seals (W006, W007 metal-cased, W009, W010 and W027 U-cup lipped). Products are made on the company's hydraulic press, injection and CNC machining lines.
O-Ring
An O-ring is an elastomer loop with a round (O-shaped) cross-section used as a mechanical seal; it sits in a groove and is compressed between two parts during assembly to create a seal. It is used in static applications and in moving joints such as pump shafts and hydraulic cylinders. Since 2013 Ege Conta has produced O-rings with special O-ring presses, a nitrogen deburring machine and a quality control machine; standard, kit and cord O-ring sizes are offered. Typical materials are NBR, HNBR, VMQ, FKM, EPDM, CR and polyurethane.
Swivel Head Gasket
Swivel head gaskets are produced from EPDM and NBR rubber according to customers' specific requirements. Production is carried out in sizes 20, 25, 32, 40, 50, 63, 75, 90 and 110. The gaskets are molded on Ege Conta's rubber pressing and injection line using the company's own compound selection, and production for special sizes is also possible.
Services
Rubber Press and Injection Molding
Ege Conta's production line includes a compound (dough) machine, 7 hydraulic presses, 4 special O-ring presses, a nitrogen deburring machine and a rubber injection molding machine commissioned at the end of 2014. With this line, molded rubber parts such as O-rings, gaskets and seals are produced from rubber types including NBR, HNBR, EPDM, FKM and silicone, and checked on a quality control machine.
Custom Sealing Element Production
Specialised in customers' custom products, Ege Conta works with its customers in-house from design to machining and from compound selection to colour selection. Custom-size seals and gaskets are made with a CNC machining center, CNC lathe and milling machine using special design and drawing software, and special polyurethane seals and POM bearings are produced on the injection molding machine.