Steel

Ceceli Demir Sanayi Ticaret A.Ş.

HEA Beam

HEA beams are supplied in S235, S275 and S355 grades with sizes 100–1000 mm, height 96–990 mm, width 100–300 mm and thickness 5.0–16.5 mm. These wide-flange H-section structural steel profiles are used for beams and columns in construction, steel structures, industrial plants, automotive and heavy industry supports. Low weight, load capacity and code-compliant dimensions make them common in architectural and industrial projects.

Ankara · Ankara Sanayi Odasi 2.ve 3. Organized Industrial Zone

Ceceli Demir Sanayi Ticaret A.Ş.

Hollow Structural Sections

Steel hollow sections are offered in grades S235JRH, S275J0H, S275J2H, S275MH, S355J0H, S355J2H and S355K2H to EN 10219-1, TS EN 10219-2 and ASTM A-500. Outside sizes range 10×15–600×400 mm, lengths 0.70–20 m and wall thickness 3–12 mm. Square or rectangular sections serve as columns, beams, frames and roof systems, and in automotive, machinery, furniture and metalworking. Galvanizing, paint or epoxy coatings can protect against corrosion.

Ankara · Ankara Sanayi Odasi 2.ve 3. Organized Industrial Zone

İvosis

U Profile

U profiles are preferred as load-bearing or supporting elements in construction, steel structures, lightweight steel structures, automotive, electrical-electronic, metal goods and energy sectors, for industrial structures and steel buildings. Due to their high load-bearing capacity they offer up to 40% material and cost advantage compared with heavy steel structures. They also provide ease of production, procurement, shipment and assembly, making steel building construction faster and more economical.

Şanliurfa

İvosis

Roof Walkway

The roof walkway is designed to provide safe access on roof surfaces; its special pattern prevents slipping and it is mounted to standing-seam sheet ribs with a dedicated fixture. It is designed for all weather conditions and corrosion resistance. It is manufactured in lengths of 100–3000 mm and heights of 50–150 mm in stainless steel (SS304), hot-dip galvanized steel (S235JR) and pregalvanized steel (DX51D+Z). Typical use is sandwich panel and trapezoidal sheet roofing.

Şanliurfa

Özkaya Soğuk Çekme San. Tic. Ltd. Şti.

Cold Drawn Round Bar / Transmission Shaft

Özkaya Soğuk Çekme was founded in 1986 in the Safranbolu industrial area to manufacture transmission shafts. The product list names cold drawn round bar and steel transmission as separate items. The company serves the iron-steel and industrial sectors with a 5000-ton annual capacity and a specialist team; domestic sales continue.

Karabük · Karabuk Organized Industrial Zone

Özkaya Soğuk Çekme San. Tic. Ltd. Şti.

Cold Drawn Hexagonal Bar

The company about page names hexagonal iron among the products it was founded to make; the catalog lists cold drawn hexagonal bar and hot drawn hex as separate items. Since 1986 it has served the iron-steel and industrial sectors. Annual capacity is 5000 tons, with standards compliance and quality as the stated principle, and domestic sales continue.

Karabük · Karabuk Organized Industrial Zone

Özkaya Soğuk Çekme San. Tic. Ltd. Şti.

Cold Drawn Square Bar

The about page states that the firm was founded to manufacture cold square bar; the catalog lists cold drawn square and hot drawn square separately. The contact page summarizes the range as transmission shaft, hex, square and flat. Annual capacity is 5000 tons; a specialist team continues domestic sales.

Karabük · Karabuk Organized Industrial Zone

Şahin Demir Sanayi ve Ticaret Ltd. Şti.

Flat Bar (Lama)

Şahin Demir Sanayi sells angle, lama (flat bar), silme, square, profile and wrought iron in Karabük. The firm entered iron and steel trade in 1999 and bought a rolling mill in the New Industrial Section in 2003. The hot rolling plant under investment is planned to produce round, lama, silme, square and angle bars at 70,000 tonnes per year. While that investment continues, the company still trades lama among its commercial steel range.

Karabük · Karabuk Organized Industrial Zone

Şahin Demir Sanayi ve Ticaret Ltd. Şti.

Square Bar

Square bar is listed as its own catalogue heading. The About page states the company buys and sells square, lama, silme and profile; the homepage says it still sells angle, lama, silme, square, profile and wrought iron. It manufactured in-house from 2003 to 2008 and continued trading when output was insufficient. Square bar is also among the products planned for the Karabük OSB hot rolling investment.

Karabük · Karabuk Organized Industrial Zone

Şahin Demir Sanayi ve Ticaret Ltd. Şti.

Marked Flat Bar

Marked flat bars (izli lama) are listed under wrought iron; the English site files them as marked lamas. The Karabük OSB directory records the activity as wrought-iron manufacture and marked lama, silme and square iron manufacture. The company also states that it does transport and wrought-iron manufacturing. A full wrought-iron plant has been under installation in the OSB since 2008; izli lama belongs to that wrought-iron range.

Karabük · Karabuk Organized Industrial Zone

Magafi Makina Enerji A.Ş.

Z Profile

Z profiles are structural members commonly used as purlin/girt sections in construction. Magafi cuts them to requested lengths on roll-form lines; punching can be done during production. They are made from black or galvanized sheet, with EN 1461 hot-dip galvanizing or Magnelis coating options. Size range is H 70-400 mm, B 40-120 mm, C 12-40 mm, thickness 1-5 mm, strip width 130-600 mm. Typical uses are roof and facade systems, warehouse and factory buildings, and prefabricated light-steel structures.

Ankara

Çelsantaş Çelik Mamülleri Sanayi ve Ticaret A.Ş.

NPI / NPU Sections

The products page lists NPU heights 50–400 mm and NPI 80–450 mm. Standard lengths are 6 or 12 m, length tolerance -0/+100 mm, grades S 235 JR or S 275 JR. They are hot-rolled structural sections for construction, machinery, agriculture and energy. The quality page lists TSE-910 I-beam and TSE-912 U-channel documents.

Karabük · Karabuk Organized Industrial Zone

Ayhan Takım Çelik A.Ş.

Cut-to-Length

Band saws of all sizes cut material. Each piece is checked for weight and size. Cutting is in İkitelli. Ordered lengths are this service. Production and dispatch are from İkitelli OSB, Başakşehir / Istanbul; published technical facts from the firm brief and website are used.

İstanbul · Ikitelli Organized Industrial Zone

Karaca Demir

Cutting to Length

Metal products in requested sizes and standards are prepared as quickly as possible. Cutting and length service on sheet, profile and pipe is part of stock supply. Planning and reliable dispatch support operational continuity.

İstanbul · Ikitelli Organized Industrial Zone

Okiçel Demir ve Çelik

Cut to Size

Cut-to-size bar and tube for industrial customers is part of stock supply. Ground shafts are also offered as ready bar. Accounts: [email protected]. Okiçel Demir ve Çelik lists this item as a published product/service group on https://www.okicel.com; the plant/office address is İkitelli OSB Demirciler Sitesi D-1 Blok No:274, Başakşehir / İstanbul.

İstanbul · Ikitelli Organized Industrial Zone

İkitelli Demir Çelik

Cut to Length

Cut-to-length for industrial customers is part of stock supply. Dispatch is from Block 11 nos. 56/58/60. Uninterrupted service is claimed on about-us. İkitelli Demir Çelik lists this item as a published product/service group on https://www.ikitellicelik.com.tr; the plant/office address is İkitelli Organize Sanayi Bölgesi Bağcılar-Güngören San. Sit. 11. Blok No:56/58/60, Başakşehir / İstanbul.

İstanbul · Ikitelli Organized Industrial Zone

Data Çelik Sanayi Ticaret Ltd. Şti.

Stainless Sheet Cutting

A guillotine shear added in 2009 cuts 1.00 mm stainless sheet in-house. Complete, on-time delivery is the first service priority. Raw material is supplied to the required thickness and size.

İstanbul · Beylikduzu Organized Industrial Zone

Boyçelik

Slit steel strip

Slit strip from the steel service centre feeds the pipe-profile and wire-spring lines. Galvanized tube and square profiles run to TS EN 10219 / TS EN 10305-5; slitting supplies the matching width and thickness. Dispatch uses the same strapped, rust-resistant packing practice as other Boyçelik coils.

Kayseri̇ · Kayseri Organized Industrial Zone

Boyçelik

Cut-to-length steel sheet

Boyçelik’s Steel Service Centre cut-to-length sheets sit alongside the pipe-profile mill. About states pipe-profile capacity was raised to 120,000 t/year in 2015; sheet feeds furniture, automotive, appliances and construction. Lengths follow the customer order and are traced from incoming coil to finished piece in SAP ERP.

Kayseri̇ · Kayseri Organized Industrial Zone

KMC Kayseri Metal Center San. ve Tic. A.Ş.

Cut-to-length processing

Kayseri̇ · Kayseri Organized Industrial Zone

Borçelik

Cut to Length

Mani̇sa · Manisa Organized Industrial Zone

Eska Metal

Cut to Length

Cut-to-length is published in Eska Metal’s machine park as a CTL line. Coil is cut to sheet length before trapezoidal and seam forming. It is part of Gaziantep 50,000 and Yalova 75,000 tonnes/year capacity. It is used to prepare sheet for roof and facade production.

Yalova · Yalova Makina Ihtisas Organized Industrial Zone

Erdoğanlar Demir

Cut to Length

Cut-to-length at Erdoğanlar Demir is cutting coil to sheet length. It is done in the same service centre as slitting, polishing and core reduction. Dispatch is from the Kartal/Samandıra plant. Sheet is used as stock or project lots before guillotine and laser cutting.

Yalova · Yalova Makina Ihtisas Organized Industrial Zone

ABC Demir Çelik Boru Profil

Cut-to-Length Service

Cut-to-Length Service.

İstanbul · Beylikduzu Organized Industrial Zone