Konya — Irrigation Pipe & Hose Service (Irrigation Pipe & Hose)

Topçuoğlu Plastik

PE Coil Irrigation Pipe Manufacturing

Irrigation Pipe & Hose Service

The Konya 2nd OIZ plant extrudes underground and above-ground PE coil irrigation pipe. Diameters run 20–110 mm with 6, 10 and 16 atm pressure classes; coil lengths are 50, 100 or 200 m by diameter. Black and blue lines are used for mains and in-field distribution.

Konya · Büyükkayacık Organized Industrial Zone

Topçuoğlu Plastik

Perforated and Plain Drip Pipe Production

Irrigation Pipe & Hose Service

Perforated drip pipe is produced at 16 mm with 0.9–1.2 mm wall and 2–8 l/h flow, and at 20 mm with 1.1 mm wall in 300 m coils. Plain round drip pipe covers 16–32 mm diameters and 150–400 m coils. Production includes emitter spacings from 20 to 100 cm.

Konya · Büyükkayacık Organized Industrial Zone

Topçuoğlu Plastik

Drip Irrigation Fitting Manufacturing

Irrigation Pipe & Hose Service

The plant manufactures drip irrigation fittings; the catalogue lists barb mini valves, gasket-outlet barb valves and threaded mini valves. Parts connect 16 mm and 20 mm drip lines to PE coil laterals. Injection-moulded valves are used in the field for shut-off and line splitting.

Konya · Büyükkayacık Organized Industrial Zone

Serdrip

Round drip pipe manufacturing

Irrigation Pipe & Hose Service

The round line covers 16/20 mm perforated and plain laterals. About also states millions of drip and sprinkler fittings are made in the same factory. SERDRİP, SERBORU and SERPIPE trademarks are used with these lines.

Konya · Büyükkayacık Organized Industrial Zone

Serdrip

Drip system installation and design

Irrigation Pipe & Hose Service

The homepage states they install systems using their drip components. The design section explains that lines, filters and pressure regulators are chosen by land, soil and crop. Installation uses pipe and fittings made at Büyükkayacık.

Konya · Büyükkayacık Organized Industrial Zone

Serdrip

Flat drip pipe manufacturing

Irrigation Pipe & Hose Service

About states drip-pipe production started in 2007 and 40 million metres a year are made at the factory. The 17 and 22 mm flat pages give wall, coil length and 1.6–2.2 L/h tables. Production is at Büyükkayacık OSB, 516th Street No:5.

Konya · Büyükkayacık Organized Industrial Zone

Panplast

PE 100 coil-pipe manufacturing

Irrigation Pipe & Hose Service

The coil page produces PE 100 coil to TS-EN-12201-2+A1 in 6–25 atm classes and 20–450 mm diameters. Coil lines at the Cihanbeyli plastics campus serve irrigation and potable water.

Konya

Panplast

Round dripline manufacturing with in-line emitters

Irrigation Pipe & Hose Service

The round-drip page states emitters are placed in the pipe during production. About says the plant makes every type of flat and round drip system. Round dripline is extruded at the Cihanbeyli campus from UV-stabilised PE up to 2 atm working pressure.

Konya

Panplast

HDPE sprinkler pipe manufacturing

Irrigation Pipe & Hose Service

The sprinkler page states clamp and latch HDPE pipe is made in 5 and 6 m lengths, diameters 50–250 mm. Latch covers 50–160 mm and clamp 75–160 mm. Abot, cross and T-headed pipes are made in the same plant.

Konya

Driptime

Drip and sprinkler pipe/fittings manufacturing

Irrigation Pipe & Hose Service

Facility 7,000 m² enclosed; plastic injection molding machines and pipe extrusion lines. Portfolio: drip pipes with and without drippers; sprinkler irrigation systems; mini valves, connectors and gaskets. Quality: ISO 9001:2015 — production of pressurized irrigation systems. Driptime® under AR Agricultural Irrigation since 2008; exports to more than 30 countries (no country list published). Location Konya Ortakonak, 501. Sokak No:8/1, Karatay.

Konya

Driptime

PC drip line manufacturing

Irrigation Pipe & Hose Service

Driptime PC DripLine pressure-compensating drip line: nominal flow 0.42 gph (1.6 l/h), 0.53 gph (2.0 l/h), 1.06 gph (4.0 l/h). Standard emitter spacing 12–60 inch and 20, 40, 45, 50, 55, 60, 70, 75, 100 cm; custom spacing available. Site copy: does not clog in dirty water; precision emitter range; permanent laser labeling. Production is at the Ortakonak plant with pipe extrusion and injection moulding in 7,000 m² enclosed space.

Konya

Driptime

LDPE irrigation pipe manufacturing

Irrigation Pipe & Hose Service

Driptime PE pipes: 6 BAR BLACK diameters 20, 25, 32, 40, 50, 63, 75, 90 mm; 10 BAR BLACK diameters 20, 25, 32, 40, 50, 63, 75, 90, 110 mm. Site properties: high flexibility; not affected from underground movements; high impact and rapid crack propagation resistance; black pipes UV resistant; chemical resistant; plant roots cannot penetrate. Low-density polyethylene irrigation pipe is produced on the Ortakonak pipe extrusion lines in 6 and 10 bar black classes.

Konya