Product discovery

Chemicals & Coatings Product — Chemicals & Coatings Supplier Products

Product catalogs for Chemicals & Coatings Product from Turkish manufacturers in Chemicals & Coatings.

25 suppliers with 37 approved Chemicals & Coatings Product listings in Chemicals & Coatings.

The Chemicals & Coatings Products category offers a wide range of items, from industrial cleaners to coating chemicals. These products play a crucial role in industrial processes and help improve operational efficiency.

The products listed here are supplied by reliable vendors located in Antalya, Gaziantep, and Ankara. When comparing these offerings, it’s important to consider factors such as formulation, application area, and environmental impact.

37 products from 25 suppliers listed

Asdaş Global

Asdas Fog Seal Surface Protectant

Chemicals & Coatings Product

Asdaş Fog is a water-based protection, renewal and rejuvenation layer produced from modified bitumen. It is applied by spraying with a distributor. On existing or newly built chip seals and hot-mix asphalt it provides waterproofing, forms a protective film that prevents aggregate loss and fills hairline cracks. About one hour after application it has cured enough for the road to be opened to traffic. Because it is modified-bitumen based it creates a jet-black surface. It extends pavement service life by three to five years. Cracks larger than 2 mm must be filled before fog seal.

Ankara · Alcı Organized Industrial Zone

Asdaş Global

Asdas Onyx Axys Mastic Coating

Chemicals & Coatings Product

Mastic surface coating is a protective maintenance product containing bitumen, polymers, particle reinforcing materials (clay etc.), surfactants, emulsifiers and synthetic aggregate, used to protect asphalt and concrete pavements. Onyx is a mix of high levels of angular fine aggregates, polymers and catalysts; it provides skid resistance and a stated service life of 5+ years depending on the existing pavement and traffic. Axys is a surface-protection mastic developed for hot and cold weather that re-blackens an asphalt surface or parking area. The first coat is 0.5–0.7 kg/m²; with the second coat the recommended total is at least 1 kg/m². In suitable weather the second coat is applied within a maximum of 15–30 minutes.

Ankara · Alcı Organized Industrial Zone

Asdaş Global

Asdas Prime Resin-Based Primer

Chemicals & Coatings Product

Resin Primer is a US-patented, nanotechnology-produced, nonionic product developed as an alternative to MC 30 (Fm2B2) type bitumen binders that contain high levels of petrochemical solvent. Because of its nonionic character it bonds to any aggregate, including limestone and basalt, regardless of the electrical charge of the substrate. It is sold concentrated and must be diluted 1:4 (w:w) with water before use. Application rate of the 1:4 water-diluted product is 0.9–1.5 kg/m². A maximum of 2–4 hours is sufficient for it to cure. It is used as a prime coat under both hot-mix asphalt and chip seal, and for dust control, soil stabilization and PMT strengthening.

Ankara · Alcı Organized Industrial Zone

Farben Kimya

Polymer emulsions

Chemicals & Coatings Product

The Farben page writes that polymer emulsions and finishing chemicals are produced at the Tuzla/Istanbul factory. About states production-sales continue in paint and binder groups. The 8,000 m² factory on 15,000 m² land is in Tuzla OSB. Technical service is offered on all product groups.

İstanbul · Istanbul Leather OSB

Orhun Kimya

Polyurethane and Epoxy Resins

Chemicals & Coatings Product

Epoxy resin shows high adhesion, chemical resistance and mechanical properties; it protects electrical components against dust and moisture and helps prevent short circuits. Polyurethane resins have high chemical resistance and resistance to dust and moisture; they are more flexible than epoxy. The company states that it holds ISO quality certificates. Source: orhunkimya.com.tr/en/polyurethane-and-epoxy-resins/.

İstanbul · Beylikduzu Organized Industrial Zone

Orhun Kimya

Air-Drying Motor Winding Varnishes

Chemicals & Coatings Product

Air-drying engine varnishes are cured at ambient temperature upon application, without the need for any external heat energy. They are based on synthetic resins; heat and density grades change according to the field of use. All products starting with OR 1xx are listed as air dry. Source: orhunkimya.com.tr/en/air-drying-motor-winding-varnishes/.

İstanbul · Beylikduzu Organized Industrial Zone

Orhun Kimya

Transformer Varnish

Chemicals & Coatings Product

Transformer varnishes are used after winding is complete to protect against external effects, provide electrical insulation and reduce noise and vibration in service. They are used on small and medium-voltage transformers, shunt reactors, voltage-regulator transformers and choke coils. Air-drying types are class F (155); oven-drying types are produced as F (155) and H (180); they can be produced as polyester–epoxy–polyurethane.

İstanbul · Beylikduzu Organized Industrial Zone

Eksen Kimya San. ve Tic. Ltd. Şti.

Chromate Coating Chemical

Chemicals & Coatings Product

Pretreatment chemicals for aluminium surfaces before powder coating are produced and offered in more than 200 variants with technical support. 24/7 technical support is provided. Production is in Istanbul Dudullu Organized Industrial Zone.

İstanbul · Dudullu Organized Industrial Zone

İnter Abrasiv San. ve Tic. A.Ş.

Jumbo Cloth Roll

Chemicals & Coatings Product

Jumbo cloth roll is the main output of the coated sanding line. After the 1997 first line, disc, tape and roll cloth come from this roll. The 2009 Manisa investment grew capacity. Width and grit follow the customer cutting plan.